TMPM330FWFG Toshiba, TMPM330FWFG Datasheet - Page 216

• Manufacturer Part Number: TMPM330FWFG
• Description: Microcontrollers (MCU) MCU w/ ARM Cortex-M3 128K FLASH, 8K SRAM
• Manufacturer: Toshiba

Specifications of TMPM330FWFG

• Processor Series: TX03
• Core: ARM Cortex M3
• 3rd Party Development Tools: MDK-ARM, RL-ARM, ULINK2
• Product Summaries: Summary
• Lead Free: Yes
• Rohs Compatible Product(s): Available
• Rom (kbytes): 128K
• Rom Type: Flash
• Ram (kbytes): 8K
• Number Of Pins: 100
• Package: LQFP(14×14)
• Vcc: 3V
• Cpu Mhz: 40
• Ssp (ch) Spi: -
• I2c/sio (ch): 3
• Uart/sio (ch): 3
• Usb: -
• Can: -
• Ethernet: -
• External Bus Interface: -
• Cs/wait Controller (ch): -
• Dma Controller: -
• 10-bit Da Converter: -
• 10-bit Ad Converter: 12
• 12-bit Ad Converter: -
• 16-bit Timer / Counter: 10
• Motor / Igbt Control: -
• Real Time Clock: 1
• Watchdog Timer: Y
• Osc Freq Detect: -
• Clock Gear: Y
• Low-power Hold Function: -
• Remote Control Interface: Y
• Hardware Cec Controller: Y
• Comparators: -
• Low-voltage Detector: -
• Etm Hardware Trace: 4-bit
• Lead Free Status / Rohs Status: Details

11 Serial Channel (SIO)
Receive Side
Transmit Side
② I/O interface mode:
Receive Side
Transmit Side
UART Mode:
11.3.21 Signal Generation Timing
Mode
Interrupt generation
timing
Framing error
generation timing
Parity error generation
timing
Overrun error
generation timing
Mode
Interrupt generation
timing
Interrupt generation
timing
Interrupt generation timing
Interrupt generation timing
Overrun error generation
timing
Interrupt generation timing
Interrupt generation timing
Under-run error generation
timing
(<WBUF> = 0)
(<WBUF> = 1)
(<WBUF> = 0)
(<WBUF> = 1)
(<WBUF> = 0)
(<WBUF> = 1)
(Note 1) Do not modify any control register when data is being sent or received (in a
(Note 2) Do not stop the receive operation (by setting SC0MOD0 <RXE> = “0”) when
(Note 3) Do not stop the transmit operation (by setting SC0MOD1 <TXE> = “0”)
state ready to transmit or receive).
data is being received.
when data is being transmitted .
9-bit
Around the center of
the 1st stop bit
Around the center of
the stop bit
⎯
Around the center of
the stop bit
9-bit
Just before the stop bit
is sent
Immediately after data
is moved to transmit
buffer 1 (just before
start bit transmission)
SCLK output mode Immediately after the rising edge of the last SCLK
SCLK input mode Immediately after the rising or falling edge of the last SCLK (for rising or
SCLK output mode Immediately after the rising edge of the last SCLK (just after data
SCLK input mode Immediately after the rising edge or falling edge of the last SCLK (right
SCLK input mode Immediately after the rising or falling edge of the last SCLK (for rising or
SCLK output mode Immediately after the rising edge of the last SCLK
SCLK input mode Immediately after the rising or falling edge of the last SCLK (for rising or
SCLK output mode Immediately after the rising edge of the last SCLK or just after data is
SCLK input mode Immediately after the rising or falling edge of the last SCLK or just after
SCLK input mode Immediately after the falling or rising edge of the next SCLK
Under development
Page204
8-bit with parity
Around the center of the 1st
stop bit
Around the center of the stop
bit
Around the center of the last
(parity) bit
Around the center of the stop
bit
8-bit with parity
Just before the stop bit is sent Just before the stop bit is sent
Immediately after data is
moved to transmit buffer 1
(just before start bit
transmission).
falling edge mode, respectively).
transfer to receive buffer 2) or just after receive buffer 2 is read.
after data is moved to receive buffer 2).
falling edge mode, respectively)
falling edge mode, respectively)
moved to Transmit Buffer 1
data is moved to Transmit Buffer 1
8-bit, 7-bit, and 7-bit with parity
Around the center of the 1st stop bit
Around the center of the stop bit
Around the center of the last (parity) bit
Around the center of the stop bit
8-bit, 7-bit, and 7-bit with parity
Immediately after data is moved to transmit
buffer 1 (just before start bit transmission)
TMPM330