HD64F2612FA20 Renesas Electronics America, HD64F2612FA20 Datasheet - Page 359

• Manufacturer Part Number: HD64F2612FA20
• Description: IC H8S MCU FLASH 128K 80QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2600r

Specifications of HD64F2612FA20

• Core Processor: H8S/2600
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: CAN, SCI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 43
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 12x10b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 80-QFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

Smart Card Interface Mode (When SMIF in SCMR is 1)
Bit
7
6
5
4
3
2
1
0
Legend:
X: Don’t care
Bit Name
TIE
RIE
TE
RE
MPIE
TEIE
CKE1
CKE0
Initial Value
0
0
0
0
0
0
0
0
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
Description
Transmit Interrupt Enable
When this bit is set to 1, TXI interrupt request is
enabled.
Receive Interrupt Enable
When this bit is set to 1, RXI and ERI interrupt
requests are enabled.
Transmit Enable
When this bit is set to 1, transmission is enabled.
Receive Enable
When this bit is set to 1, reception is enabled.
Multiprocessor Interrupt Enable (enabled only when
the MP bit in SMR is 1 in asynchronous mode)
Write 0 to this bit in Smart Card interface mode.
Transmit End Interrupt Enable
Write 0 to this bit in Smart Card interface mode.
Clock Enable 0 and 1
Enables or disables clock output from the SCK pin.
The clock output can be dynamically switched in GSM
mode. For details, refer to section 14.7.8, Clock
Output Control.
When the GM bit in SMR is 0:
00: Output disabled (SCK pin can be used as an I/O
01: Clock output
1X: Reserved
When the GM bit in SMR is 1:
00: Output fixed low
01: Clock output
10: Output fixed high
11: Clock output
port pin)
Section 14 Serial Communication Interface (SCI)
Rev. 7.00 Sep. 11, 2009 Page 323 of 566
REJ09B0211-0700