HD64F2612FA20 Renesas Electronics America, HD64F2612FA20 Datasheet - Page 112

• Manufacturer Part Number: HD64F2612FA20
• Description: IC H8S MCU FLASH 128K 80QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2600r

Specifications of HD64F2612FA20

• Core Processor: H8S/2600
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: CAN, SCI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 43
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 12x10b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 80-QFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

Section 5 Interrupt Controller
5.4.2
The sources for internal interrupts from on-chip supporting modules have the following features:
• For each on-chip supporting module there are flags that indicate the interrupt request status,
• The interrupt priority level can be set by means of IPR.
• The DTC can be activated by a TPU, SCI, or other interrupt request.
• When the DTC is activated by an interrupt request, it is not affected by the interrupt control
5.5
Table 5.2 shows interrupt exception handling sources, vector addresses, and interrupt priorities.
For default priorities, the lower the vector number, the higher the priority. Priorities among
modules can be set by means of the IPR. Modules set at the same priority will conform to their
default priorities. Priorities within a module are fixed.
Note: DTC, PC break controller, and MMT interrupt sources are not implemented in the
Rev. 7.00 Sep. 11, 2009 Page 76 of 566
REJ09B0211-0700
and enable bits that select enabling or disabling of these interrupts. If both of these are set to 1
for a particular interrupt source, an interrupt request is issued to the interrupt controller.
mode or CPU interrupt mask bit.
H8S/2614 and H8S/2616.
Internal Interrupts
Interrupt Exception Handling Vector Table