HD64F2612FA20 Renesas Electronics America, HD64F2612FA20 Datasheet - Page 292

• Manufacturer Part Number: HD64F2612FA20
• Description: IC H8S MCU FLASH 128K 80QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2600r

Specifications of HD64F2612FA20

• Core Processor: H8S/2600
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: CAN, SCI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 43
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 12x10b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 80-QFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

Section 11 Motor Management Timer (MMT)
Register Operation: In the operating modes, four buffer registers and ten compare registers are
used.
The registers that are constantly compared with the TCNT counter are TGRU, TGRV, and
TGRW. In addition, TGRUU, TGRVU, TGRWU, and TPDR are compared with TCNT when
TCNT is counting up, and TGRUD, TGRVD, TGRWD are compared with TCNT when TCNT is
counting down. The buffer register for TPDR is TPBR; the buffer register for TGRUU, TGRU,
and TGRUD is TBRU; the buffer register for TGRVU, TGRV, and TGRVD is TBRV; and the
buffer register for TGRWU, TGRW, and TGRWD is TBRW.
To change compare register data, the new data should be written to the corresponding buffer
register. The buffer registers can be read and written to at all times. Data written to TPBR and the
buffer operation addresses for TBRU to TBRW is transferred at the timing specified by bits MD1
and MD0 in the timer mode register (TMDR). Data written to the free operation addresses for
TBRU to TBRW is transferred immediately.
After data transfer is completed, the relationship between the compare registers and buffer
registers is as follows:
TGRU (TGRV, TGRW) value = TBRU (TBRV, TBRW) value + Td (Td: value set in TDDR)
TGRUU (TGRVU, TGRWU) value = TBRU (TBRV, TBRW) value + 2Td
TGRUD (TGRVD, TGRWD) value = TBRU (TBRV, TBRW) value
TPDR value = TPBR value + 2Td
The values of TBRU to TBRW should always be set in the range H'0000 to H'FFFF – 2Td, and the
value of TPBR should always be set in the range H'0000 to H'FFFF – 4Td.
Rev. 7.00 Sep. 11, 2009 Page 256 of 566
REJ09B0211-0700
TGRUU
TGRUD
H'FFFF
H'0000
TGRU
TPDR
2Td
Figure 11.4 Example of TCNT Count Operation
Td
TCNT
Td
1/2 period
2Td
2Td
(TPBR)
Td