LPC2458FET180,551 NXP Semiconductors, LPC2458FET180,551 Datasheet - Page 58

• Manufacturer Part Number: LPC2458FET180,551
• Description: IC ARM7 MCU FLASH 512K 180TFBGA
• Manufacturer: NXP Semiconductors
• Series: LPC2400r

Specifications of LPC2458FET180,551

• Core Processor: ARM7
• Core Size: 16/32-Bit
• Speed: 72MHz
• Connectivity: CAN, EBI/EMI, Ethernet, I²C, Microwire, MMC, SPI, SSI, SSP, UART/USART, USB OTG
• Peripherals: Brown-out Detect/Reset, DMA, I²S, POR, PWM, WDT
• Number Of I /o: 136
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 98K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 1x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 180-TFBGA
• Processor Series: LPC24
• Core: ARM7TDMI-S
• Data Bus Width: 32 bit
• Data Ram Size: 98 KB
• Interface Type: CAN, Ethernet, I2C, I2S, IrDA, SPI, SSP, UART, USB
• Maximum Clock Frequency: 72 MHz
• Number Of Programmable I/os: 136
• Number Of Timers: 4
• Operating Supply Voltage: 3.3 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: MDK-ARM, RL-ARM, ULINK2, SAB-TFBGA180
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 8 Channel
• On-chip Dac: 10 bit, 1 Channel
• Package: 180TFBGA
• Device Core: ARM7TDMI-S
• Family Name: LPC2000
• Maximum Speed: 72 MHz
• For Use With: 622-1023 - BOARD SCKT ADAPTER FOR TFBGA180622-1005 - USB IN-CIRCUIT PROG ARM7 LPC2K
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details
• Other names: 568-4258; 935282454551; LPC2458FET180-S

NXP Semiconductors
UM10237_4
User manual
3.3.2 USB Clock Configuration register (USBCLKCFG - 0xE01F C108)
3.3.3 IRC Trim Register (IRCTRIM - 0xE01F C1A4)
3.3.4 Peripheral Clock Selection registers 0 and 1 (PCLKSEL0 - 0xE01F C1A8 and
The USBCLKCFG register controls the division of the PLL output before it is used by the
USB block. If the PLL is bypassed, the division may be by 1. In that case, the PLL input
frequency must be 48 MHz, with a 500 ppm tolerance. When the PLL is running, the
output must be divided in order to bring the USB clock frequency to 48 MHz with a 50%
duty cycle. A 4-bit divider allows obtaining the correct USB clock from any even multiple of
48 MHz (i.e. any mutliple of 96 MHz) within the PLL operating range.
Remark: The Internal RC clock can not be used as a clock source for USB because a
more precise clock is needed (see
Table 54.
[1]
The USB clock is derived from the PLL output signal, divided by USBSEL + 1. Having
USBSEL = 1 results in USB’s clock being one half the PLL output.
This register is used to trim the on-chip 4 MHz oscillator.
Table 55.
PCLKSEL1 - 0xE01F C1AC)
A pair of bits in a Peripheral Clock Selection register controls the rate of the clock signal
that will be supplied to the corresponding peripheral as specified in
Table 4–57
Table 56.
Bit Symbol
3:0 USBSEL
7:4 -
Bit
7:0
15:8
Bit
1:0
3:2
5:4
7:6
9:8
Actual reset value depends on IRC factory trimming.
Symbol
PCLK_WDT
PCLK_TIMER0
PCLK_TIMER1
PCLK_UART0
PCLK_UART1
Symbol
IRCtrim
-
USB Clock Configuration register (USBCLKCFG - address 0xE01F C108) bit
description
Peripheral Clock Selection register 0 (PCLKSEL0 - address 0xE01F C1A8) bit
description
IRC Trim register (IRCTRIM - address 0xE01F C1A4) bit description
and
Table
Description
Selects the divide value for creating the USB clock from the PLL output.
Warning: Improper setting of this value will result in incorrect operation
of the USB interface.
Reserved, user software should not write ones to reserved bits. The
value read from a reserved bit is not defined.
Description
IRC trim value. It controls the on-chip 4 MHz IRC frequency.
Reserved. Software must write 0 into these bits.
4–58.
Rev. 04 — 26 August 2009
Description
Peripheral clock selection for WDT.
Peripheral clock selection for TIMER0.
Peripheral clock selection for TIMER1.
Peripheral clock selection for UART0.
Peripheral clock selection for UART1.
Table
Chapter 4: LPC24XX Clocking and power control
4–42).
Table
UM10237
© NXP B.V. 2009. All rights reserved.
4–56,
58 of 792
Reset
value
0xA0
NA
Reset
value
00
00
00
00
00
Reset
value
0
NA