LPC2458FET180,551 NXP Semiconductors, LPC2458FET180,551 Datasheet - Page 488

• Manufacturer Part Number: LPC2458FET180,551
• Description: IC ARM7 MCU FLASH 512K 180TFBGA
• Manufacturer: NXP Semiconductors
• Series: LPC2400r

Specifications of LPC2458FET180,551

• Core Processor: ARM7
• Core Size: 16/32-Bit
• Speed: 72MHz
• Connectivity: CAN, EBI/EMI, Ethernet, I²C, Microwire, MMC, SPI, SSI, SSP, UART/USART, USB OTG
• Peripherals: Brown-out Detect/Reset, DMA, I²S, POR, PWM, WDT
• Number Of I /o: 136
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 98K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 1x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 180-TFBGA
• Processor Series: LPC24
• Core: ARM7TDMI-S
• Data Bus Width: 32 bit
• Data Ram Size: 98 KB
• Interface Type: CAN, Ethernet, I2C, I2S, IrDA, SPI, SSP, UART, USB
• Maximum Clock Frequency: 72 MHz
• Number Of Programmable I/os: 136
• Number Of Timers: 4
• Operating Supply Voltage: 3.3 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: MDK-ARM, RL-ARM, ULINK2, SAB-TFBGA180
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 8 Channel
• On-chip Dac: 10 bit, 1 Channel
• Package: 180TFBGA
• Device Core: ARM7TDMI-S
• Family Name: LPC2000
• Maximum Speed: 72 MHz
• For Use With: 622-1023 - BOARD SCKT ADAPTER FOR TFBGA180622-1005 - USB IN-CIRCUIT PROG ARM7 LPC2K
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details
• Other names: 568-4258; 935282454551; LPC2458FET180-S

NXP Semiconductors
Table 427. Status Register (CAN1SR - address 0xE004 401C, CAN2SR - address 0xE004 801C) bit description
UM10237_4
User manual
Bit
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
Symbol Value
TS1
ES
BS
RBS
DOS
TBS2
TCS2
RS
TS2
ES
BS
RBS
DOS
TBS3
TCS3
RS
TS3
[1]
[1]
[2]
[2]
0(idle)
1(transmit)
0(locked)
1(released)
0(incomplete) The previously requested transmission for Tx Buffer 2 is not complete.
1(complete)
0(idle)
1(transmit)
0(locked)
1(released)
0(incomplete) The previously requested transmission for Tx Buffer 3 is not complete.
1(complete)
0(idle)
1(transmit)
Function
Transmit Status 1.
There is no transmission from Tx Buffer 1.
The CAN Controller is transmitting a message from Tx Buffer 1.
Error Status. This bit is identical to the ES bit in the CANxGSR.
Bus Status. This bit is identical to the BS bit in the CANxGSR.
Receive Buffer Status. This bit is identical to the RBS bit in the CANxGSR.
Data Overrun Status. This bit is identical to the DOS bit in the CANxGSR.
Transmit Buffer Status 2.
Software cannot access the Tx Buffer 2 nor write to the corresponding
CANxTFI, CANxTID, CANxTDA, and CANxTDB registers because a
message is either waiting for transmission or is in transmitting process.
Software may write a message into the Transmit Buffer 2 and its CANxTFI,
CANxTID, CANxTDA, and CANxTDB registers.
Transmission Complete Status.
The previously requested transmission for Tx Buffer 2 has been successfully
completed.
Receive Status. This bit is identical to the RS bit in the GSR.
Transmit Status 2.
There is no transmission from Tx Buffer 2.
The CAN Controller is transmitting a message from Tx Buffer 2.
Error Status. This bit is identical to the ES bit in the CANxGSR.
Bus Status. This bit is identical to the BS bit in the CANxGSR.
Receive Buffer Status. This bit is identical to the RBS bit in the CANxGSR.
Data Overrun Status. This bit is identical to the DOS bit in the CANxGSR.
Transmit Buffer Status 3.
Software cannot access the Tx Buffer 3 nor write to the corresponding
CANxTFI, CANxTID, CANxTDA, and CANxTDB registers because a
message is either waiting for transmission or is in transmitting process.
Software may write a message into the Transmit Buffer 3 and its CANxTFI,
CANxTID, CANxTDA, and CANxTDB registers.
Transmission Complete Status.
The previously requested transmission for Tx Buffer 3 has been successfully
completed.
Receive Status. This bit is identical to the RS bit in the GSR.
Transmit Status 3.
There is no transmission from Tx Buffer 3.
The CAN Controller is transmitting a message from Tx Buffer 3.
Rev. 04 — 26 August 2009
Chapter 18: LPC24XX CAN controllers CAN1/2
UM10237
© NXP B.V. 2009. All rights reserved.
0
Reset
Value
1
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
488 of 792
0
RM
Set
0
0
0
0
1
x
0
0
0
0
0
0
1
x
0
0