LPC2458FET180,551 NXP Semiconductors, LPC2458FET180,551 Datasheet - Page 300

• Manufacturer Part Number: LPC2458FET180,551
• Description: IC ARM7 MCU FLASH 512K 180TFBGA
• Manufacturer: NXP Semiconductors
• Series: LPC2400r

Specifications of LPC2458FET180,551

• Core Processor: ARM7
• Core Size: 16/32-Bit
• Speed: 72MHz
• Connectivity: CAN, EBI/EMI, Ethernet, I²C, Microwire, MMC, SPI, SSI, SSP, UART/USART, USB OTG
• Peripherals: Brown-out Detect/Reset, DMA, I²S, POR, PWM, WDT
• Number Of I /o: 136
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 98K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 1x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 180-TFBGA
• Processor Series: LPC24
• Core: ARM7TDMI-S
• Data Bus Width: 32 bit
• Data Ram Size: 98 KB
• Interface Type: CAN, Ethernet, I2C, I2S, IrDA, SPI, SSP, UART, USB
• Maximum Clock Frequency: 72 MHz
• Number Of Programmable I/os: 136
• Number Of Timers: 4
• Operating Supply Voltage: 3.3 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: MDK-ARM, RL-ARM, ULINK2, SAB-TFBGA180
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 8 Channel
• On-chip Dac: 10 bit, 1 Channel
• Package: 180TFBGA
• Device Core: ARM7TDMI-S
• Family Name: LPC2000
• Maximum Speed: 72 MHz
• For Use With: 622-1023 - BOARD SCKT ADAPTER FOR TFBGA180622-1005 - USB IN-CIRCUIT PROG ARM7 LPC2K
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details
• Other names: 568-4258; 935282454551; LPC2458FET180-S

NXP Semiconductors
Table 258. Color display driven with 2 2/3 pixel data
UM10237_4
User manual
Byte
0
1
2
CLD[7]
P2[Green]
P5[Red]
P7[Blue]
6.10.1 STN displays
6.10.2 TFT displays
6.10 STN and TFT data select
6.11 Interrupt generation
6.8 Panel clock generator
6.9 Timing controller
Each formatter consists of three 3-bit (RGB) shift left registers. RGB pixel data bit values
from the gray scaler are concurrently shifted into the respective registers. When enough
data is available, a byte is constructed by multiplexing the registered data to the correct bit
position to satisfy the RGB data pattern of LCD panel. The byte is transferred to the 3-byte
FIFO, which has enough space to store eight color pixels.
The output of the panel clock generator block is the panel clock, pin LCDDCLK. The panel
clock can be based on either the peripheral clock for the LCD block or the external clock
input for the LCD, pin LCDCLKIN. Whichever source is selected can be divided down in
order to produce the internal LCD clock, LCDCLK.
The panel clock generator can be programmed to output the LCD panel clock in the range
of LCDCLK/2 to LCDCLK/1025 to match the bpp data rate of the LCD panel being used.
The CLKSEL bit in the LCD_POL register determines whether the base clock used is
CCLK or the LCDCLKIN pin.
The primary function of the timing controller block is to generate the horizontal and vertical
timing panel signals. It also provides the panel bias and enable signals. These timings are
all register-programmable.
Support is provided for passive Super Twisted Nematic (STN) and active Thin Film
Transistor (TFT) LCD display types:
STN display panels require algorithmic pixel pattern generation to provide pseudo gray
scaling on monochrome displays, or color creation on color displays.
TFT display panels require the digital color value of each pixel to be applied to the display
data inputs.
Four interrupts are generated by the LCD controller, and a single combined interrupt. The
four interrupts are:
CLD[6]
P2[Red]
P4q[Blue]
P7[Green]
•
•
Master bus error interrupt.
Vertical compare interrupt.
CLD[5]
P1[Blue]
P4[Green]
P7[Red]
Rev. 04 — 26 August 2009
CLD[4]
P1[Green]
P4[Red]
P6[Blue]
CLD[3]
P3[Blue]
P6[Green]
P1[Red]
Chapter 12: LPC24XX LCD controller
CLD[2]
P0[Blue]
P3[Green]
P6[Red]
CLD[1]
P0[Green]
P3[Red]
P5[Blue]
UM10237
© NXP B.V. 2009. All rights reserved.
CLD[0]
P0[Red]
P2[Blue]
P5[Green]
300 of 792