LPC2458FET180,551 NXP Semiconductors, LPC2458FET180,551 Datasheet - Page 22

• Manufacturer Part Number: LPC2458FET180,551
• Description: IC ARM7 MCU FLASH 512K 180TFBGA
• Manufacturer: NXP Semiconductors
• Series: LPC2400r

Specifications of LPC2458FET180,551

• Core Processor: ARM7
• Core Size: 16/32-Bit
• Speed: 72MHz
• Connectivity: CAN, EBI/EMI, Ethernet, I²C, Microwire, MMC, SPI, SSI, SSP, UART/USART, USB OTG
• Peripherals: Brown-out Detect/Reset, DMA, I²S, POR, PWM, WDT
• Number Of I /o: 136
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 98K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 1x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 180-TFBGA
• Processor Series: LPC24
• Core: ARM7TDMI-S
• Data Bus Width: 32 bit
• Data Ram Size: 98 KB
• Interface Type: CAN, Ethernet, I2C, I2S, IrDA, SPI, SSP, UART, USB
• Maximum Clock Frequency: 72 MHz
• Number Of Programmable I/os: 136
• Number Of Timers: 4
• Operating Supply Voltage: 3.3 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: MDK-ARM, RL-ARM, ULINK2, SAB-TFBGA180
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 8 Channel
• On-chip Dac: 10 bit, 1 Channel
• Package: 180TFBGA
• Device Core: ARM7TDMI-S
• Family Name: LPC2000
• Maximum Speed: 72 MHz
• For Use With: 622-1023 - BOARD SCKT ADAPTER FOR TFBGA180622-1005 - USB IN-CIRCUIT PROG ARM7 LPC2K
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details
• Other names: 568-4258; 935282454551; LPC2458FET180-S

NXP Semiconductors
5. LPC2400 memory re-mapping and boot ROM
UM10237_4
User manual
5.1 Memory map concepts and operating modes
The basic concept on the LPC2400 is that each memory area has a "natural" location in
the memory map. This is the address range for which code residing in that area is written.
The bulk of each memory space remains permanently fixed in the same location,
eliminating the need to have portions of the code designed to run in different address
ranges.
Because of the location of the interrupt vectors on the ARM7 processor (at addresses
0x0000 0000 through 0x0000 001C, as shown in
Boot ROM and SRAM spaces need to be re-mapped in order to allow alternative uses of
interrupts in the different operating modes described in
interrupts is accomplished via the Memory Mapping Control feature
mapping control” on page
Table 18.
Address
0x0000 0000
0x0000 0004
0x0000 0008
0x0000 000C
0x0000 0010
0x0000 0014
0x0000 0018
0x0000 001C
ARM exception vector locations
Exception
Reset
Undefined Instruction
Software Interrupt
Prefetch Abort (instruction fetch memory fault)
Data Abort (data access memory fault)
Reserved
Note: Identified as reserved in ARM documentation, this location is used
by the Boot Loader as the Valid User Program key when booting from
on-chip flash memory. This is described in detail in
IRQ
FIQ
Rev. 04 — 26 August 2009
24).
Chapter 2: LPC24XX Memory mapping
Table 2–18
Table
below), a small portion of the
2–19. Re-mapping of the
(Section 2–6 “Memory
Section
UM10237
© NXP B.V. 2009. All rights reserved.
30–5.1.1.
22 of 792