LPC2458FET180,551 NXP Semiconductors, LPC2458FET180,551 Datasheet - Page 214

• Manufacturer Part Number: LPC2458FET180,551
• Description: IC ARM7 MCU FLASH 512K 180TFBGA
• Manufacturer: NXP Semiconductors
• Series: LPC2400r

Specifications of LPC2458FET180,551

• Core Processor: ARM7
• Core Size: 16/32-Bit
• Speed: 72MHz
• Connectivity: CAN, EBI/EMI, Ethernet, I²C, Microwire, MMC, SPI, SSI, SSP, UART/USART, USB OTG
• Peripherals: Brown-out Detect/Reset, DMA, I²S, POR, PWM, WDT
• Number Of I /o: 136
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 98K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 1x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 180-TFBGA
• Processor Series: LPC24
• Core: ARM7TDMI-S
• Data Bus Width: 32 bit
• Data Ram Size: 98 KB
• Interface Type: CAN, Ethernet, I2C, I2S, IrDA, SPI, SSP, UART, USB
• Maximum Clock Frequency: 72 MHz
• Number Of Programmable I/os: 136
• Number Of Timers: 4
• Operating Supply Voltage: 3.3 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: MDK-ARM, RL-ARM, ULINK2, SAB-TFBGA180
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 8 Channel
• On-chip Dac: 10 bit, 1 Channel
• Package: 180TFBGA
• Device Core: ARM7TDMI-S
• Family Name: LPC2000
• Maximum Speed: 72 MHz
• For Use With: 622-1023 - BOARD SCKT ADAPTER FOR TFBGA180622-1005 - USB IN-CIRCUIT PROG ARM7 LPC2K
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details
• Other names: 568-4258; 935282454551; LPC2458FET180-S

NXP Semiconductors
UM10237_4
User manual
5.1 Partitioning
The Ethernet block and associated device driver software offer the functionality of the
Media Access Control (MAC) sublayer of the data link layer in the OSI reference model
(see IEEE std 802.3). The MAC sublayer offers the service of transmitting and receiving
frames to the next higher protocol level, the MAC client layer, typically the Logical Link
Control sublayer. The device driver software implements the interface to the MAC client
layer. It sets up registers in the Ethernet block, maintains descriptor arrays pointing to
frames in memory and receives results back from the Ethernet block through interrupts.
When a frame is transmitted, the software partially sets up the Ethernet frames by
providing pointers to the destination address field, source address field, the length/type
field, the MAC client data field and optionally the CRC in the frame check sequence field.
Preferably concatenation of frame fields should be done by using the scatter/gather
functionality of the Ethernet core to avoid unnecessary copying of data. The hardware
adds the preamble and start frame delimiter fields and can optionally add the CRC, if
requested by software. When a packet is received the hardware strips the preamble and
start frame delimiter and passes the rest of the packet - the Ethernet frame - to the device
driver, including destination address, source address, length/type field, MAC client data
and frame check sequence (FCS).
Apart from the MAC, the Ethernet block contains receive and transmit DMA managers that
control receive and transmit data streams between the MAC and the AHB interface.
Frames are passed via descriptor arrays located in host memory, so that the hardware
can process many frames without software/CPU support. Frames can consist of multiple
fragments that are accessed with scatter/gather DMA. The DMA managers optimize
memory bandwidth using prefetching and buffering.
•
•
•
•
•
The host registers module containing the registers in the software view and handling
AHB accesses to the Ethernet block. The host registers connect to the transmit and
receive datapath as well as the MAC.
The DMA to AHB interface. This provides an AHB master connection that allows the
Ethernet block to access the Ethernet SRAM for reading of descriptors, writing of
status, and reading and writing data buffers.
The Ethernet MAC and attached RMII adapter. The MAC interfaces to the off-chip
PHY.
The transmit datapath, including:
– The transmit DMA manager which reads descriptors and data from memory and
– The transmit retry module handling Ethernet retry and abort situations.
– The transmit flow control module which can insert Ethernet pause frames.
The receive datapath, including:
– The receive DMA manager which reads descriptors from memory and writes data
– The Ethernet MAC which detects frame types by parsing part of the frame header.
– The receive filter which can filter out certain Ethernet frames by applying different
– The receive buffer implementing a delay for receive frames to allow the filter to
writes status to memory.
and status to memory.
filtering schemes.
filter out certain frames before storing them to memory.
Rev. 04 — 26 August 2009
Chapter 11: LPC24XX Ethernet
UM10237
© NXP B.V. 2009. All rights reserved.
214 of 792