LPC2458FET180,551 NXP Semiconductors, LPC2458FET180,551 Datasheet - Page 502

• Manufacturer Part Number: LPC2458FET180,551
• Description: IC ARM7 MCU FLASH 512K 180TFBGA
• Manufacturer: NXP Semiconductors
• Series: LPC2400r

Specifications of LPC2458FET180,551

• Core Processor: ARM7
• Core Size: 16/32-Bit
• Speed: 72MHz
• Connectivity: CAN, EBI/EMI, Ethernet, I²C, Microwire, MMC, SPI, SSI, SSP, UART/USART, USB OTG
• Peripherals: Brown-out Detect/Reset, DMA, I²S, POR, PWM, WDT
• Number Of I /o: 136
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 98K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 1x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 180-TFBGA
• Processor Series: LPC24
• Core: ARM7TDMI-S
• Data Bus Width: 32 bit
• Data Ram Size: 98 KB
• Interface Type: CAN, Ethernet, I2C, I2S, IrDA, SPI, SSP, UART, USB
• Maximum Clock Frequency: 72 MHz
• Number Of Programmable I/os: 136
• Number Of Timers: 4
• Operating Supply Voltage: 3.3 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: MDK-ARM, RL-ARM, ULINK2, SAB-TFBGA180
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 8 Channel
• On-chip Dac: 10 bit, 1 Channel
• Package: 180TFBGA
• Device Core: ARM7TDMI-S
• Family Name: LPC2000
• Maximum Speed: 72 MHz
• For Use With: 622-1023 - BOARD SCKT ADAPTER FOR TFBGA180622-1005 - USB IN-CIRCUIT PROG ARM7 LPC2K
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details
• Other names: 568-4258; 935282454551; LPC2458FET180-S

NXP Semiconductors
UM10237_4
User manual
15.3 Standard Frame Individual Start Address Register (SFF_sa -
15.4 Standard Frame Group Start Address Register (SFF_GRP_sa -
0xE003 C004)
Table 444. Standard Frame Individual Start Address Register (SFF_sa - address
[1]
0xE003 C008)
Table 445. Standard Frame Group Start Address Register (SFF_GRP_sa - address
[1]
Bit
1:0
10:2
31:11 -
Bit
1:0
11:2
31:12 -
Write access to the look-up table section configuration registers are possible only during the Acceptance
filter bypass mode or the Acceptance filter off mode.
Write access to the look-up table section configuration registers are possible only during the Acceptance
filter bypass mode or the Acceptance filter off mode.
Symbol
-
SFF_sa
Symbol
-
SFF_GRP_sa
0xE003 C004) bit description
0xE003 C008) bit description
[1]
Description
Reserved, user software should not write ones to reserved bits. The
value read from a reserved bit is not defined.
The start address of the table of individual Standard Identifiers in AF
Lookup RAM. If the table is empty, write the same value in this register
and the SFF_GRP_sa register described below. For compatibility with
possible future devices, write zeroes in bits 31:11 and 1:0 of this
register. If the eFCAN bit in the AFMR is 1, this value also indicates the
size of the table of Standard IDs which the Acceptance Filter will search
and (if found) automatically store received messages in Acceptance
Filter RAM.
Reserved, user software should not write ones to reserved bits. The
value read from a reserved bit is not defined.
[1]
Rev. 04 — 26 August 2009
Description
Reserved, user software should not write ones to reserved bits.
The value read from a reserved bit is not defined.
The start address of the table of grouped Standard Identifiers in
AF Lookup RAM. If the table is empty, write the same value in
this register and the EFF_sa register described below. The
largest value that should be written to this register is 0x800, when
only the Standard Individual table is used, and the last word
(address 0x7FC) in AF Lookup Table RAM is used. For
compatibility with possible future devices, please write zeroes in
bits 31:12 and 1:0 of this register.
Reserved, user software should not write ones to reserved bits.
The value read from a reserved bit is not defined.
Chapter 18: LPC24XX CAN controllers CAN1/2
UM10237
© NXP B.V. 2009. All rights reserved.
502 of 792
Reset
Value
NA
0
NA
Reset
Value
NA
0
NA