LPC2458FET180,551 NXP Semiconductors, LPC2458FET180,551 Datasheet - Page 311

• Manufacturer Part Number: LPC2458FET180,551
• Description: IC ARM7 MCU FLASH 512K 180TFBGA
• Manufacturer: NXP Semiconductors
• Series: LPC2400r

Specifications of LPC2458FET180,551

• Core Processor: ARM7
• Core Size: 16/32-Bit
• Speed: 72MHz
• Connectivity: CAN, EBI/EMI, Ethernet, I²C, Microwire, MMC, SPI, SSI, SSP, UART/USART, USB OTG
• Peripherals: Brown-out Detect/Reset, DMA, I²S, POR, PWM, WDT
• Number Of I /o: 136
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 98K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 1x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 180-TFBGA
• Processor Series: LPC24
• Core: ARM7TDMI-S
• Data Bus Width: 32 bit
• Data Ram Size: 98 KB
• Interface Type: CAN, Ethernet, I2C, I2S, IrDA, SPI, SSP, UART, USB
• Maximum Clock Frequency: 72 MHz
• Number Of Programmable I/os: 136
• Number Of Timers: 4
• Operating Supply Voltage: 3.3 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: MDK-ARM, RL-ARM, ULINK2, SAB-TFBGA180
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 8 Channel
• On-chip Dac: 10 bit, 1 Channel
• Package: 180TFBGA
• Device Core: ARM7TDMI-S
• Family Name: LPC2000
• Maximum Speed: 72 MHz
• For Use With: 622-1023 - BOARD SCKT ADAPTER FOR TFBGA180622-1005 - USB IN-CIRCUIT PROG ARM7 LPC2K
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details
• Other names: 568-4258; 935282454551; LPC2458FET180-S

NXP Semiconductors
UM10237_4
User manual
7.8 LCD Control register (LCD_CTRL, RW - 0xFFE1 0018)
Optionally, the value may be changed mid-frame to create double-buffered video displays.
These registers are copied to the corresponding current registers at each LCD vertical
synchronization. This event causes the LNBU bit and an optional interrupt to be
generated. The interrupt can be used to reprogram the base address when generating
double-buffered video.
The contents of the LCD_LPBASE register are described in
Table 266. Lower Panel Frame Base register (LCD_LPBASE, RW - 0xFFE1 0014)
The LCD_CTRL register controls the LCD operating mode and the panel pixel
parameters.
The contents of the LCD_CTRL register are described in
Table 267. LCD Control register (LCD_CTRL, RW - 0xFFE1 0018)
Bits
31:3
2:0
Bits
31:17
16
15:14
13:12
11
Function
LCDLPBASE
reserved
Function
reserved
WATERMARK LCD DMA FIFO watermark level.
reserved
LcdVComp
LcdPwr
Rev. 04 — 26 August 2009
Description
LCD lower panel base address.
This is the start address of the lower panel frame data in memory
and is doubleword aligned.
Reserved, user software should not write ones to reserved bits.
The value read from a reserved bit is not defined.
Description
Reserved, user software should not write ones to reserved bits.
The value read from a reserved bit is not defined.
Controls when DMA requests are generated:
0 = An LCD DMA request is generated when either of the DMA
FIFOs have four or more empty locations.
1 = An LCD DMA request is generated when either of the DMA
FIFOs have eight or more empty locations.
Reserved, user software should not write ones to reserved bits.
The value read from a reserved bit is not defined.
LCD Vertical Compare Interrupt.
Generate VComp interrupt at:
00 = start of vertical synchronization.
01 = start of back porch.
10 = start of active video.
11 = start of front porch.
LCD power enable.
0 = power not gated through to LCD panel and LCDV[23:0]
signals disabled, (held LOW).
1 = power gated through to LCD panel and LCDV[23:0] signals
enabled, (active).
See LCD power-up and power-down sequence for details on
LCD power sequencing.
Chapter 12: LPC24XX LCD controller
Table
Table
12–267.
12–266.
UM10237
© NXP B.V. 2009. All rights reserved.
311 of 792
Reset
value
0x0
-
Reset
value
-
0x0
-
0x0
0x0