EP1S10F484I6 Altera, EP1S10F484I6 Datasheet - Page 455

• Manufacturer Part Number: EP1S10F484I6
• Description: IC STRATIX FPGA 10K LE 484-FBGA
• Manufacturer: Altera
• Series: Stratix®r

Specifications of EP1S10F484I6

• Number Of Logic Elements/cells: 10570
• Number Of Labs/clbs: 1057
• Total Ram Bits: 920448
• Number Of I /o: 335
• Voltage - Supply: 1.425 V ~ 1.575 V
• Mounting Type: Surface Mount
• Operating Temperature: 0°C ~ 85°C
• Package / Case: 484-FBGA
• Family Name: Stratix
• Number Of Logic Blocks/elements: 10570
• # I/os (max): 335
• Frequency (max): 450.05MHz
• Process Technology: 0.13um (CMOS)
• Operating Supply Voltage (typ): 1.5V
• Logic Cells: 10570
• Ram Bits: 920448
• Operating Supply Voltage (min): 1.425V
• Operating Supply Voltage (max): 1.575V
• Operating Temp Range: -40C to 100C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 484
• Package Type: FC-FBGA
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Number Of Gates: -
• Lead Free Status / Rohs Status: Not Compliant

Hot Socketing
Altera Corporation
June 2006
Programmable Current Drive Strength
The Stratix and Stratix GX device I/O pins support various output
current drive settings as shown in
strength settings help decrease the effects of simultaneously switching
outputs (SSO) in conjunction with reducing system noise. The supported
settings ensure that the device driver meets the I
for the corresponding I/O standard.
These drive-strength settings are programmable on a per-pin basis (for
output and bidirectional pins only) using the Quartus II software. To
modify the current strength of a particular pin, see
Strength Settings” on page
Stratix devices support hot socketing without any external components.
In a hot socketing situation, a device’s output buffers are turned off
during system power-up or power-down. Stratix and Stratix GX devices
support any power-up or power-down sequence (V
simplify designs. For mixed-voltage environments, you can drive signals
into the device before or during power-up or power-down without
damaging the device. Stratix and Stratix GX devices do not drive out until
the device is configured and has attained proper operating conditions.
Even though you can power up or down the V
supplies in any sequence you should not power down any I/O bank(s)
that contains the configuration pins while leaving other I/O banks
powered on. For power up and power down, all supplies (V
V
another. This prevents I/O pins from driving out.
Notes to
(1)
(2)
3.3-V LVTTL
3.3-V LVCMOS
2.5-V LVTTL/LVCMOS
1.8-V LVTTL/LVCMOS
1.5-V LVCMOS
Table 4–7. Programmable Drive Strength
CCIO
This is the Quartus II software default current setting.
I/O banks 1, 2, 5, and 6 do not support this setting.
power planes) must be powered up and down within 100 ms of one
I/O Standard
Table
4–7:
Selectable I/O Standards in Stratix & Stratix GX Devices
4–40.
24 (1), 16, 12, 8, 4
24 (2), 12 (1), 8, 4, 2
16 (1), 12, 8, 2
12 (1), 8, 2
8 (1), 4, 2
I
OH
Table
/ I
OL
Stratix Device Handbook, Volume 2
Current Strength Setting (mA)
4–7. These programmable drive
CCIO
OH
“Programmable Drive
and I
and V
CCIO
OL
and V
CCINT
specifications
CCINT
CCINT
power
and all
) to
4–27