EP1S10F484I6 Altera, EP1S10F484I6 Datasheet - Page 361

• Manufacturer Part Number: EP1S10F484I6
• Description: IC STRATIX FPGA 10K LE 484-FBGA
• Manufacturer: Altera
• Series: Stratix®r

Specifications of EP1S10F484I6

• Number Of Logic Elements/cells: 10570
• Number Of Labs/clbs: 1057
• Total Ram Bits: 920448
• Number Of I /o: 335
• Voltage - Supply: 1.425 V ~ 1.575 V
• Mounting Type: Surface Mount
• Operating Temperature: 0°C ~ 85°C
• Package / Case: 484-FBGA
• Family Name: Stratix
• Number Of Logic Blocks/elements: 10570
• # I/os (max): 335
• Frequency (max): 450.05MHz
• Process Technology: 0.13um (CMOS)
• Operating Supply Voltage (typ): 1.5V
• Logic Cells: 10570
• Ram Bits: 920448
• Operating Supply Voltage (min): 1.425V
• Operating Supply Voltage (max): 1.575V
• Operating Temp Range: -40C to 100C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 484
• Package Type: FC-FBGA
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Number Of Gates: -
• Lead Free Status / Rohs Status: Not Compliant

Figure 1–23. V
Altera Corporation
July 2005
CCINT
Plane Partitioned for V
Thick V
Because of board constraints, you might not be able to partition a V
island. Instead, run a thick trace from the power supply to each V
The traces should be at least 20 mils thick.
In each of these three cases, you should filter each V
decoupling circuit shown in
high impedance at frequencies of 50 MHz or higher and a 10- F tantalum
parallel capacitor where the power enters the board. Decouple each V
pin with a 0.1- F and 0.001- F parallel combination of ceramic capacitors
located as close as possible to the Stratix or Stratix GX device. You can
connect the GNDA pins directly to the same ground plane as the device’s
digital ground.
CCA
Trace
CCA
Island
General-Purpose PLLs in Stratix & Stratix GX Devices
Figure
1–24. Place a ferrite bead that exhibits
Stratix Device Handbook, Volume 2
CCA
pin with a
CCA
CCA
1–51
pin.
CCA