MC68302EH20C Freescale Semiconductor, MC68302EH20C Datasheet - Page 241

• Manufacturer Part Number: MC68302EH20C
• Description: IC MPU MULTI-PROTOCOL 132-PQFP
• Manufacturer: Freescale Semiconductor

Specifications of MC68302EH20C

• Processor Type: M683xx 32-Bit
• Speed: 20MHz
• Voltage: 5V
• Mounting Type: Surface Mount
• Package / Case: 132-MQFP, 132-PQFP
• Family Name: M68000
• Device Core: ColdFire
• Device Core Size: 32b
• Frequency (max): 20MHz
• Instruction Set Architecture: RISC
• Supply Voltage 1 (typ): 5V
• Operating Temp Range: 0C to 70C
• Operating Temperature Classification: Commercial
• Mounting: Surface Mount
• Pin Count: 132
• Package Type: PQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Lead Free Status / Rohs Status: Compliant

W—Wrap (Final BD in Table)
I—Interrupt
L—Last
Bit 10—Must be set to zero by the user.
Bits 9–2, 0—Reserved for future use.
UN—Underrun
Data Length
Tx Buffer Pointer
4.5.15.9 V.110 Event Register
The SCC event register (SCCE) is referred to as the V.110 event register when the SCC is
configured as a V.110 controller. It is an 8-bit register used to report events recognized by
the V.110 channel and to generate interrupts. On recognition of an event, the V.110 control-
MOTOROLA
The following bits are written by the V.110 controller after it has finished transmitting the
associated data buffer.
The V.110 controller encountered a transmitter underrun condition while transmitting the
associated data buffer.
The data length is the number of octets that the V.110 controller should transmit from this
BD's data buffer. It is never modified by the CP. The data length should be greater than
zero.
This pointer, which contains the address of the associated data buffer, may be even or
odd. The buffer may reside in either internal or external memory.
0 = This is not the last BD in the Tx BD table.
1 = This is the last BD in the Tx BD table. After this buffer has been used, the V.110
0 = No interrupt is generated after this buffer has been serviced.
1 = Either TX or TXE in the V.110 event register will be set when this buffer has been
0 = This buffer is not the last in the message.
1 = This bit is set by the processor to indicate that this buffer is the last buffer in the
controller will transmit data from the first BD in the table.
serviced by the V.110 controller, which can cause interrupts.
current frame. The V.110 controller will transmit ones until the next BD is ready.
The user is required to set the wrap bit in one of the first eight
BDs; otherwise, errant behavior may occur.
For correct operation of the function codes, the upper 8 bits of
the pointer must be initialized to zero.
MC68302 USER’S MANUAL
NOTE
NOTE
Communications Processor (CP)
4-121