SAM9M10 Atmel Corporation, SAM9M10 Datasheet - Page 573

• Manufacturer Part Number: SAM9M10
• Manufacturer: Atmel Corporation

Specifications of SAM9M10

• Flash (kbytes): 0 Kbytes
• Pin Count: 324
• Max. Operating Frequency: 400 MHz
• Cpu: ARM926
• Hardware Qtouch Acquisition: No
• Max I/o Pins: 160
• Ext Interrupts: 160
• Usb Transceiver: 3
• Usb Speed: Hi-Speed
• Usb Interface: Host, Device
• Spi: 2
• Twi (i2c): 2
• Uart: 5
• Lin: 4
• Ssc: 2
• Ethernet: 1
• Sd / Emmc: 2
• Graphic Lcd: Yes
• Video Decoder: Yes
• Camera Interface: Yes
• Adc Channels: 8
• Adc Resolution (bits): 10
• Adc Speed (ksps): 440
• Resistive Touch Screen: Yes
• Temp. Sensor: No
• Crypto Engine: No
• Sram (kbytes): 64
• Self Program Memory: NO
• External Bus Interface: 2
• Dram Memory: DDR2/LPDDR, SDRAM/LPSDR
• Nand Interface: Yes
• Picopower: No
• Temp. Range (deg C): -40 to 85
• I/o Supply Class: 1.8/3.3
• Operating Voltage (vcc): 0.9 to 1.1
• Fpu: No
• Mpu / Mmu: No / Yes
• Timers: 6
• Output Compare Channels: 6
• Input Capture Channels: 6
• Pwm Channels: 4
• 32khz Rtc: Yes
• Calibrated Rc Oscillator: No

SAM9M10
• DLM: Data Length Mode
0: The response data length is defined by the field DLC of this register.
1: The response data length is defined by the bits 5 and 6 of the Identifier (IDCHR in US_LINIR).
• FDIS: Frame Slot Mode Disable
0: The Frame Slot Mode is enabled.
1: The Frame Slot Mode is disabled.
• WKUPTYP: Wakeup Signal Type
0: setting the bit LINWKUP in the control register sends a LIN 2.0 wakeup signal.
1: setting the bit LINWKUP in the control register sends a LIN 1.3 wakeup signal.
• DLC: Data Length Control
0 - 255: Defines the response data length if DLM=0,in that case the response data length is equal to DLC+1 bytes.
• PDCM: PDC Mode
0: The LIN mode register US_LINMR is not written by the PDC.
1: The LIN mode register US_LINMR (excepting that flag) is written by the PDC.
573
6355D–ATARM–7-Sep-11