SAM9M10 Atmel Corporation, SAM9M10 Datasheet - Page 294

• Manufacturer Part Number: SAM9M10
• Manufacturer: Atmel Corporation

Specifications of SAM9M10

• Flash (kbytes): 0 Kbytes
• Pin Count: 324
• Max. Operating Frequency: 400 MHz
• Cpu: ARM926
• Hardware Qtouch Acquisition: No
• Max I/o Pins: 160
• Ext Interrupts: 160
• Usb Transceiver: 3
• Usb Speed: Hi-Speed
• Usb Interface: Host, Device
• Spi: 2
• Twi (i2c): 2
• Uart: 5
• Lin: 4
• Ssc: 2
• Ethernet: 1
• Sd / Emmc: 2
• Graphic Lcd: Yes
• Video Decoder: Yes
• Camera Interface: Yes
• Adc Channels: 8
• Adc Resolution (bits): 10
• Adc Speed (ksps): 440
• Resistive Touch Screen: Yes
• Temp. Sensor: No
• Crypto Engine: No
• Sram (kbytes): 64
• Self Program Memory: NO
• External Bus Interface: 2
• Dram Memory: DDR2/LPDDR, SDRAM/LPSDR
• Nand Interface: Yes
• Picopower: No
• Temp. Range (deg C): -40 to 85
• I/o Supply Class: 1.8/3.3
• Operating Voltage (vcc): 0.9 to 1.1
• Fpu: No
• Mpu / Mmu: No / Yes
• Timers: 6
• Output Compare Channels: 6
• Input Capture Channels: 6
• Pwm Channels: 4
• 32khz Rtc: Yes
• Calibrated Rc Oscillator: No

• RECERR15: Recoverable Error in the page between the 3840th and the 4095th bytes
Fixed to 0 if
0 = No Errors Detected.
1 = Errors Detected. If MUL_ERROR is 0, a single correctable error was detected. Otherwise, multiple uncorrected errors
were detected
• ECCERR15: ECC Error in the page between the 3840th and the 4095th bytes
Fixed to 0 if
0 = No Errors Detected.
1 = A single bit error occurred in the ECC bytes.
Read ECC Parity 15 register, the error occurred at the location which contains a 1 in the least significant 24 bits.
• MULERR15: Multiple Error in the page between the 3840th and the 4095th bytes
Fixed to 0 if
0 = No Multiple Errors Detected.
1 = Multiple Errors Detected.
294
SAM9M10
TYPECORREC = 0.
TYPECORREC = 0
TYPECORREC = 0.
6355D–ATARM–7-Sep-11