DF2166VT33WV Renesas Electronics America, DF2166VT33WV Datasheet - Page 675

• Manufacturer Part Number: DF2166VT33WV
• Description: MCU 16BIT FLASH 3V 512K 144-TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2100r

Specifications of DF2166VT33WV

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 33MHz
• Connectivity: I²C, IrDA, LPC, SCI, SmartCard
• Peripherals: POR, PWM, WDT
• Number Of I /o: 106
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 40K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: External
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 144-TQFP, 144-VQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

(a) Flash multipurpose address area parameter (FMPAR: general register ER1 of CPU)
This parameter stores the start address of the programming destination on the user MAT.
When the address in the area other than flash memory space is set, an error occurs.
The start address of the programming destination must be at the 128-byte boundary. If this
boundary condition is not satisfied, an error occurs. The error occurrence is indicated by the WA
bit (bit 1) in FPFR.
Bit
31 to 0
(b) Flash multipurpose data destination parameter (FMPDR: general register ER0 of CPU):
This parameter stores the start address in the area which stores the data to be programmed in the
user MAT. When the storage destination of the program data is in flash memory, an error occurs.
The error occurrence is indicated by the WD bit in FPFR.
Bit
31 to 0
(c) Flash pass/fail parameter (FPFR: general register R0L of CPU)
This parameter indicates the return value of the program processing result.
Bit
7
Bit Name
MOA31 to
MOA0
Bit Name
MOD31 to
MOD0
Bit Name

Initial
Value

Initial
Value

Initial
Value

R/W
R/W
R/W
R/W
R/W

Description
Store the start address of the programming destination
on the user MAT. The consecutive 128-byte
programming is executed starting from the specified start
address of the user MAT. Therefore, the specified
programming start address becomes a 128-byte
boundary and MOA6 to MOA0 are always 0.
Description
Store the start address of the area which stores the
program data for the user MAT. The consecutive 128-
byte data is programmed to the user MAT starting from
the specified start address.
Description
Unused
Return 0.
Rev. 3.00, 03/04, page 633 of 830