AT91SAM9263B-CU Atmel, AT91SAM9263B-CU Datasheet - Page 41

• Manufacturer Part Number: AT91SAM9263B-CU
• Description: IC ARM9 MCU 200 MHZ 324-TFBGA
• Manufacturer: Atmel
• Series: AT91SAMr

Specifications of AT91SAM9263B-CU

• Core Processor: ARM9
• Core Size: 16/32-Bit
• Speed: 240MHz
• Connectivity: CAN, Ethernet, I²C, MMC, SPI, SSC, UART/USART, USB
• Peripherals: AC'97, LCD, POR, PWM, WDT
• Number Of I /o: 160
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: ROM
• Ram Size: 128K x 8
• Voltage - Supply (vcc/vdd): 1.08 V ~ 1.32 V
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 324-TFBGA
• Processor Series: AT91SAMx
• Core: ARM926EJ-S
• Data Bus Width: 32 bit
• Data Ram Size: 96 KB
• Interface Type: 2-Wire, EBI, I2S, MCI, SPI, USART
• Maximum Clock Frequency: 200 MHz
• Number Of Programmable I/os: 160
• Number Of Timers: 4
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: JTRACE-ARM-2M, MDK-ARM, RL-ARM, ULINK2
• Development Tools By Supplier: AT91SAM-ICE, AT91-ISP, AT91SAM9263-EK
• Minimum Operating Temperature: - 40 C
• Package: 324TFBGA
• Device Core: ARM926EJ-S
• Family Name: 91S
• Maximum Speed: 200 MHz
• Operating Supply Voltage: 1.8|2.5|3.3 V
• Controller Family/series: AT91SAM9xxx
• No. Of I/o's: 160
• Ram Memory Size: 96KB
• Cpu Speed: 240MHz
• No. Of Timers: 1
• Rohs Compliant: Yes
• For Use With: AT91SAM9263-EK - KIT EVAL FOR AT91SAM9263AT91SAM-ICE - EMULATOR FOR AT91 ARM7/ARM9
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Data Converters: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: Q3735625

10.4
10.4.1
10.4.2
10.4.3
10.4.4
10.4.5
10.4.6
10.4.7
6249H–ATARM–27-Jul-09
System Resource Multiplexing
LCD Controller
ETM
EBI1
Ethernet 10/100MAC
SSC
USART
NAND Flash
™
The LCD Controller can interface with several LCD panels. It supports 4 bits per pixel (bpp), 8
bpp or 16 bpp without limitation. Interfacing 24 bpp TFT panels prevents using the Ethernet
MAC. 16 bpp TFT panels are interfaced through peripheral B functions, as color data is output
on LCDD3 to LCDD7, LCDD11 to LCDD15 and LCDD19 to LCDD23. Intensity bit is output on
LCDD10. Using the peripheral B does not prevent using MAC lines. 16 bpp STN panels are
interfaced through peripheral A and color data is output on LCDD0 to LCDD15, thus MAC lines
can be used on peripheral B.
Mapping the LCD signals on peripheral A and peripheral B makes is possible to use 24 bpp TFT
panels in 24 bits (peripheral A) or 16 bits (peripheral B) by reprogramming the PIO controller and
thus without hardware modification.
Using the ETM prevents the use of the EBI0 in 32-bit mode. Only 16-bit mode (EBI0_D0 to
EBI0_D15) is available, makes EBI0 unable to interface CompactFlash and NAND Flash cards,
reduces EBI0’s address bus width which makes it unable to address memory ranges bigger than
0x7FFFFF and finally it makes impossible to use EBI0_NCS2 and EBI0_NCS3.
Using the following features prevents using EBI1 in 32-bit mode:
Using the following features of EBI1 prevent using Ethernet 10/100MAC:
Using SSC0 prevents using the AC97 Controller and Two-wire Interface.
Using SSC1 prevents using DMA Request 1, PWM0, PWM1, LCDCC and PCK1.
Using USART2 prevents using EBI0’s NWAIT signal, Chip Select 4 and CompactFlash Chip
Enable 2.
Using USART1 prevents using EBI0’s Chip Select 5 and CompactFlash Chip Enable1.
Using the NAND Flash interface on EBI1 prevents using Ethernet MAC.
• the second slots of MCI0 and/or MCI1
• USART0
• DMA request 0 (DMARQ0)
• SDRAM
• NAND (unless NANDCS, NANDOE and NANDWE are managed by PIO)
• SMC 32 bits (SMC 16 bits is still available)
• NCS1, NCS2 are not available in SMC mode
AT91SAM9263
41