AT91SAM9263B-CU Atmel, AT91SAM9263B-CU Datasheet - Page 101

• Manufacturer Part Number: AT91SAM9263B-CU
• Description: IC ARM9 MCU 200 MHZ 324-TFBGA
• Manufacturer: Atmel
• Series: AT91SAMr

Specifications of AT91SAM9263B-CU

• Core Processor: ARM9
• Core Size: 16/32-Bit
• Speed: 240MHz
• Connectivity: CAN, Ethernet, I²C, MMC, SPI, SSC, UART/USART, USB
• Peripherals: AC'97, LCD, POR, PWM, WDT
• Number Of I /o: 160
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: ROM
• Ram Size: 128K x 8
• Voltage - Supply (vcc/vdd): 1.08 V ~ 1.32 V
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 324-TFBGA
• Processor Series: AT91SAMx
• Core: ARM926EJ-S
• Data Bus Width: 32 bit
• Data Ram Size: 96 KB
• Interface Type: 2-Wire, EBI, I2S, MCI, SPI, USART
• Maximum Clock Frequency: 200 MHz
• Number Of Programmable I/os: 160
• Number Of Timers: 4
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: JTRACE-ARM-2M, MDK-ARM, RL-ARM, ULINK2
• Development Tools By Supplier: AT91SAM-ICE, AT91-ISP, AT91SAM9263-EK
• Minimum Operating Temperature: - 40 C
• Package: 324TFBGA
• Device Core: ARM926EJ-S
• Family Name: 91S
• Maximum Speed: 200 MHz
• Operating Supply Voltage: 1.8|2.5|3.3 V
• Controller Family/series: AT91SAM9xxx
• No. Of I/o's: 160
• Ram Memory Size: 96KB
• Cpu Speed: 240MHz
• No. Of Timers: 1
• Rohs Compliant: Yes
• For Use With: AT91SAM9263-EK - KIT EVAL FOR AT91SAM9263AT91SAM-ICE - EMULATOR FOR AT91 ARM7/ARM9
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Data Converters: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: Q3735625

13.5
13.6
13.6.1
13.7
6249H–ATARM–27-Jul-09
SD Card Boot
NAND Flash Boot
SAM-BA Boot
Supported NAND Flash Devices
The SD Card Boot program searches for a valid application in the SD Card memory.
(Boot ROM does not support high capacity SDCards.)
It looks for a boot.bin file in the root directory of a FAT12/16/32 formatted SD Card. If a valid file
is found, this application is loaded into internal SRAM and executed by branching at address
0x0000_0000 after remap. This application may be the application code or a second-level
bootloader.
The NAND Flash Boot program searches for a valid application in the NAND Flash memory. If a
valid application is found, this application is loaded into internal SRAM and executed by branch-
ing at address 0x0000_0000 after remap. See
on Valid Image Detection.
Any 8-bit or 16-bit NAND Flash device connected on EBI0 is supported.
If no valid DataFlash device has been found during the DataFlash boot sequence, the SAM-BA
boot program is performed.
The SAM-BA boot principle is to:
Table 13-3.
Command
O
o
H
h
W
w
S
R
G
V
• Write commands: Write a byte (O), a halfword (H) or a word (W) to the target.
– Check if USB Device enumeration has occurred.
– Check if character(s) have been received on the DBGU.
– Once the communication interface is identified, the application runs in an infinite
– Address: Address in hexadecimal.
– Value: Byte, halfword or word to write in hexadecimal.
– Output: ‘>’.
loop waiting for different commands as in
Commands Available through the SAM-BA Boot
Action
write a byte
read a byte
write a half word
read a half word
write a word
read a word
send a file
receive a file
go
display version
Argument(s)
Address, Value#
Address,#
Address, Value#
Address,#
Address, Value#
Address,#
Address,#
Address, NbOfBytes#
Address#
No argument
“DataFlash Boot” on page 98
Table
13-3.
Example
O200001,CA#
o200001,#
H200002,CAFE#
h200002,#
W200000,CAFEDECA#
w200000,#
S200000,#
R200000,1234#
G200200#
V#
AT91SAM9263
for more information
101