sed1355 ETC-unknow, sed1355 Datasheet - Page 328

• Manufacturer Part Number: sed1355
• Description: Sed1355 Embedded Ramdac Lcd/crt Controller
• Manufacturer: ETC-unknow

Page 8
Example Installation
Installation for Hitachi D9000 and ETMA ODO
Installation for CEPC Environment
SED1355
X23A-E-001-04
Follow the procedures from your Hitachi D9000 (or ETMA ODO) manual and download the
following to the D9000 platform:
1.
2.
Windows CE v2.0 can be loaded on a PC using a floppy drive or a hard drive. The two methods are
described below:
1.
2.
Download SEIKO EPSON’s common interface FPGA code (ODO.RBF) to the EEPROM of
the D9000 system.
Download the Windows CE binary ROM image (NK.BIN) to the FLASH memory of the
D9000 system.
To load CEPC from a floppy drive:
To load CEPC from a hard drive:
a.
b.
c.
d.
e.
f.
a.
b.
c.
d.
e.
Create a DOS bootable floppy disk.
Edit CONFIG.SYS on the floppy disk to contain the following line only.
Edit AUTOEXEC.BAT on the floppy disk to contain the following lines.
Copy LOADCEPC.EXE from c:\wince\public\common\oak\bin to the bootable
floppy disk.
Confirm that NK.BIN is located in c:\wince\release.
Reboot the system from the bootable floppy disk.
Copy LOADCEPC.EXE to the root directory of the hard drive.
Edit CONFIG.SYS on the hard drive to contain the following line only.
Edit AUTOEXEC.BAT on the hard drive to contain the following lines.
Confirm that NK.BIN is located in c:\wince\release.
Reboot the system from the hard drive.
device=a:\himem.sys
mode com1:9600,n,8,1
loadcepc /B:9600 /C:1 /D:2 c:\wince\release\nk.bin
device=c:\himem.sys
mode com1:9600,n,8,1
loadcepc /B:9600 /C:1 /D:2 c:\wince\release\nk.bin
Epson Research and Development
Windows® CE Display Drivers
Vancouver Design Center
Issue Date: 98/10/30