sed1355 ETC-unknow, sed1355 Datasheet - Page 326

• Manufacturer Part Number: sed1355
• Description: Sed1355 Embedded Ramdac Lcd/crt Controller
• Manufacturer: ETC-unknow

Page 6
SED1355
X23A-E-001-04
Note
4.
5.
6.
7.
8.
9.
SED1355.H should include the following:
Create a new project by following the procedure documented in “Creating a New Project
Directory” from the Windows CE ETK
included with the ETK v2.0. Follow the steps below to create a “X86 DEMO7” shortcut on the
Windows NT v4.0 desktop which uses the current “DEMO7” project:
Create a sub-directory named SED1355 under \wince\platform\cepc\drivers\display.
Copy the source code to the SED1355 subdirectory.
Add an entry for the SED1355 in the file \wince\platform\cepc\drivers\display\dirs.
Modify the file CONFIG.BIB (using any text editor such as NOTEPAD) to set the system
RAM size, the SED1355 IO port and display buffer address mapping. Note that
CONFIG.BIB is located in X:\wince\platform\cepc\files (where X: is the drive letter). Since
the SDU1355B0C maps the IO port to 0xE00000 and memory to 0xC00000, the CEPC
machine should use the CMOS setup to create a 4M byte hole from address 0xC00000 to
0xFFFFFF. The following lines should be in CONFIG.BIB:
Edit the file PLATFORM.BIB (located in X:\wince\platform\cepc\files) to set the default dis-
play driver to the file SED1355.DLL. SED1355.DLL will be created during the build in
step 13.
a. Right click on the “Start” menu on the taskbar.
b. Click on the item “Open All Users” and the “Start Menu” window will come up.
c. Click on the icon “Programs”.
d. Click on the icon “Windows CE Embedded Development Kit”.
e. Drag the icon “X86 DEMO1” onto the desktop using the right mouse button.
f. Click on “Copy Here”.
g. Rename the icon “X86 DEMO1” on the desktop to “X86 DEMO7” by right clicking on
the icon and choosing “rename”.
h. Right click on the icon “X86 DEMO7” and click on “Properties” to bring up the
“X86 DEMO7 Properties” window.
i. Replace the string “DEMO1” under the entry “Target” with “DEMO7”.
j. Click on “OK” to finish.
NK 80200000 00500000 RAMIMGE
RAM 80700000 00500000 RAM
#define PhysicalVmemSize 0x00200000L
#define PhysicalPortAddr 0x00E00000L
#define PhysicalVmemAddr 0x00C00000L
You may replace the following lines in PLATFORM.BIB:
IF CEPC_DDI_VGA2BPP
ddi.dll
ENDIF
$(_FLATRELEASEDIR)\ddi_vga2.dll
V
2.0. Alternately, use the current “DEMO7” project
Epson Research and Development
Windows® CE Display Drivers
NK SH
Vancouver Design Center
Issue Date: 98/10/30