ATMEGA64M1-15MZ Atmel, ATMEGA64M1-15MZ Datasheet - Page 30

• Manufacturer Part Number: ATMEGA64M1-15MZ
• Description: MCU AVR 64KB FLASH 3PSC 32-VQFN
• Manufacturer: Atmel
• Series: AVR® ATmegar

Specifications of ATMEGA64M1-15MZ

• Package / Case: 32-VQFN
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Operating Temperature: -40°C ~ 125°C
• Speed: 16MHz
• Eeprom Size: 2K x 8
• Core Processor: AVR
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Program Memory Size: 64KB (64K x 8)
• Data Converters: A/D 11x10b; D/A 1x10b
• Oscillator Type: Internal
• Peripherals: Brown-out Detect/Reset, POR, PWM, Temp Sensor, WDT
• Connectivity: CAN, LIN, SPI, UART/USART
• Core Size: 8-Bit
• Processor Series: ATMEGA64x
• Core: AVR8
• Data Bus Width: 8 bit
• Data Ram Size: 4 KB
• 3rd Party Development Tools: EWAVR, EWAVR-BL
• Development Tools By Supplier: ATAVRDRAGON, ATSTK500, ATSTK600, ATAVRISP2, ATAVRONEKIT, ATADAPCAN01
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Number Of I /o: -
• Lead Free Status / Rohs Status: Details

5.1.3
5.1.4
5.1.5
5.2
30
Clock Sources
Atmel ATmega16/32/64/M1/C1
Flash Clock – clk
PLL Clock – clk
ADC Clock – clk
PLL
ADC
The Flash clock controls operation of the Flash interface. The Flash clock is usually active
simultaneously with the CPU clock.
The PLL clock allows the fast peripherals to be clocked directly from a 64/32MHz clock. A
16MHz clock is also derived for the CPU.
The ADC is provided with a dedicated clock domain. This allows halting the CPU and I/O
clocks in order to reduce noise generated by digital circuitry. This gives more accurate ADC
conversion results.
The device has the following clock source options, selectable by Flash Fuse bits as illustrated
Table 5-1. The clock from the selected source is input to the AVR clock generator, and routed
to the appropriate modules.
Table 5-1.
Note:
The various choices for each clocking option is given in the following sections. When the CPU
wakes up from Power-down or Power-save, the selected clock source is used to time the
start-up, ensuring stable Oscillator operation before instruction execution starts. When the
CPU starts from reset, there is an additional delay allowing the power to reach a stable level
before starting normal operation. The Watchdog Oscillator is used for timing this real-time part
of the start-up time. The number of WDT Oscillator cycles used for each time-out is shown in
Table
“Watchdog Oscillator Frequency versus V
FLASH
Device Clocking Option
External Crystal/Ceramic Resonator
PLL output divided by 4 : 16MHz / PLL driven by External
Crystal/Ceramic Resonator
PLL output divided by 4 : 16MHz / PLL driven by External
Crystal/Ceramic Resonator
Reserved
Reserved
PLL output divided by 4 : 16MHz
Calibrated Internal RC Oscillator
PLL output divided by 4 : 16MHz / PLL driven by External
clock
External Clock
5-2. The frequency of the Watchdog Oscillator is voltage dependent as shown in
1. For all fuses “1” means unprogrammed while “0” means programmed.
2. Ext Osc : External Osc
3. RC Osc : Internal RC Oscillator
4. Ext Clk : External Clock Input
Device Clocking Options Select
CC
” on page
(1)
342.
PLL / 4
System
Clock
Ext Osc
Ext Osc
PLL / 4
N/A
N/A
RC Osc
PLL / 4
Ext Clk
RC Osc
RC Osc
RC Osc
RC Osc
PLL Input
Ext Osc
Ext Osc
N/A
N/A
Ext Clk
7647G–AVR–09/11
1111 - 1000
CKSEL3..0
0100
0101
0110
0111
0011
0010
0001
0000