IPT-DSPBUILDER Altera, IPT-DSPBUILDER Datasheet - Page 393

• Manufacturer Part Number: IPT-DSPBUILDER
• Description: DSP BUILDER SOFTWARE
• Manufacturer: Altera
• Type: DSPr

Specifications of IPT-DSPBUILDER

• Function: DSP Builder
• License: Initial License
• Software Application: IP CORE, DSP BUILDER
• Core Architecture: FPGA
• Core Sub-architecture: Arria, Cyclone, Stratix
• Supported Families: Arria GX, Arria II GX, Cyclone, Stratix
• Rohs Compliant: NA
• Lead Free Status / RoHS Status: Not applicable / Not applicable

Chapter 11: Boards Library
Stratix III EP3SL150 DSP Board
Table 11–11. Stratix III EP3SL150 DSP Board Blocks (Part 2 of 2)
Figure 11–16. LED and Push-button Design Example for the Stratix III EP3SL150 DSP Board Blocks
© June 2010 Altera Corporation
f
Block
LED0–LED7
PB0–PB3,
CPU_RESETN
For information about setting up the board and the supported hardware features,
refer to the
Altera provides the following design examples for the Stratix III EP3SL150 DSP board:
■
■
■
■
Figure 11–16
Figure 11–17
Test3S150Board_Leds.mdl: tests the LEDs and push-button switches on the main
development board.
Test3S150Board_QuadDisplay.mdl: tests the 7-segment display on the main
development board.
Test3S150Board_HSMA.mdl: tests the analog-to-digital and digital-to-analog
converters on the daughtercard connected to HSMC port A.
Test3S150Board_HSMB.mdl: tests the analog-to-digital and digital-to-analog
converters on the daughtercard connected to HSMC port B.
Stratix III Development Board, Reference
Controls eight user-definable LEDs (D20–D27).
Controls four user-definable push-button switches (S2–S5) and the CPU reset
push-button (S6). You can optionally specify the clock signal.
shows the test design for the LEDs and push-button switches.
shows the test design for the 7-segment display.
Preliminary
Description
Manual.
DSP Builder Standard Blockset Libraries
11–19