IPT-DSPBUILDER Altera, IPT-DSPBUILDER Datasheet - Page 202

• Manufacturer Part Number: IPT-DSPBUILDER
• Description: DSP BUILDER SOFTWARE
• Manufacturer: Altera
• Type: DSPr

Specifications of IPT-DSPBUILDER

• Function: DSP Builder
• License: Initial License
• Software Application: IP CORE, DSP BUILDER
• Core Architecture: FPGA
• Core Sub-architecture: Arria, Cyclone, Stratix
• Supported Families: Arria GX, Arria II GX, Cyclone, Stratix
• Rohs Compliant: NA
• Lead Free Status / RoHS Status: Not applicable / Not applicable

1–12
Table 1–15. Quartus II Pinout Assignments Block Parameters
Resource Usage
DSP Builder Standard Blockset Libraries
Pin Name
Pin Location
Name
1
String
String
For example:
assigns abc[0] to Pin_AA, abc[1] to Pin_AB, and abc[2] to Pin_AC
To set the pin assignment for a clock, use the name of the
the default is clock) for the pin name. For example:
To set the pin assignment for a reset, use the name of the reset signal specified in the
Clock
example:
Table 1–15
Figure 1–4
Figure 1–4. Assignments With Quartus II Pinout Assignments Blocks
Use the Resource Usage block to check the hardware resources, display timing
information, and highlight the critical paths in your design.
You must save your model file and run
Resource Usage block.
The Resource Usage block displays an estimate of the logic, block RAM and DSP
blocks resources required by your design.
Value
Pin Name: abc
Pin Location: Pin_AA, Pin_AB, Pin_AC
Pin Name: clock
Pin Location: Pin_AM17
Pin Name: aclr
Pin Location: Pin_B4
block (for example the default global reset is aclr) for the pin name. For
The pin name must be the exact instance name of the Input or Output block from
the IO & Bus library.
Pin location value of the FPGA IO. Refer to the Quartus II Help for the pinout values of a
device.
shows the Quartus II Pinout Assignments block parameters.
shows an example with the Quartus II Pinout Assignments block.
Preliminary
Signal Compiler
Description
Clock
before you can use the
© June 2010 Altera Corporation
block (for example,
Chapter 1: AltLab Library
Resource Usage