MOD5234-100IR NetBurner Inc, MOD5234-100IR Datasheet - Page 154

• Manufacturer Part Number: MOD5234-100IR
• Description: MOD5234 10/100 ETHERNET MODULE
• Manufacturer: NetBurner Inc
• Type: Controllers & Processorsr

Specifications of MOD5234-100IR

• Interface: I²C, SPI, UART
• Voltage - Supply: 2.5V
• Mounting Type: Surface Mount
• Package / Case: Module
• Product: Modules
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Data Format: -
• Baud Rates: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: Q4483564

Clock Module
7-10
11–10
Bits
9–0
16
15
14
13
12
LOCIRQ
DISCLK
LOLIRQ
LOCRE
DEPTH
Name
RATE
EXP
Table 7-5. SYNCR Field Descriptions (Continued)
Loss-of-clock reset enable. Determines how the system handles a loss-of-clock condition.
When the LOCEN bit is clear, LOCRE has no effect. If the LOCS flag in SYNSR indicates
a loss-of-clock condition, setting the LOCRE bit causes an immediate reset. To prevent an
immediate reset, the LOCRE bit must be cleared before entering stop mode with the PLL
disabled.
0 No reset on loss-of-clock
1 Reset on loss-of-clock
Note: In external clock mode, the LOCRE bit has no effect.
Disable CLKOUT. This bit determines whether CLKOUT is active. When CLKOUT is
disabled it is driven low.
0 CLKOUT driven normally
1 CLKOUT driven low (disabled).
Loss-of-lock interrupt request. This bit determines if a loss-of-lock is ignored or if an
interrupt is requested. When operating in normal or 1:1 PLL mode, the PLL must be locked
before setting the LOLIRQ bit. Otherwise an interrupt is immediately requested.
0 Ignore loss-of-lock – no interrupt requested
1 Request interrupt on loss-of-lock
Note: In external clock mode, the LOLIRQ bit has no effect.
Loss-of-clock interrupt request. This bit determines if a loss-of-clock is ignored or if an
interrupt is requested. LOCIRQ has no effect when LOCEN is cleared. If the LOCF flag in
SYNSR indicates a loss-of-clock condition, setting (or having previously set) the LOCIRQ
bit causes an interrupt to be immediately requested.
0 Ignore loss-of-clock – no interrupt requested
1 Request interrupt on loss-of-clock
Note: In external clock mode, the LOCIRQ bit has no effect.
Modulation rate. This bit controls the rate of frequency modulation applied to the core
frequency. Changing the rate by writing to the RATE bit will initiate the FM calibration
sequence.
0 F
1 F
Note: Frequency modulation should be disabled prior to making a change to the RATE.
Frequency modulation depth and enable.This bit field controls depth and enables the
frequency modulation. When set to a value other than 0x0, the frequency modulation is
automatically enabled.
00 Modulation Depth (% of f
01 Modulation Depth (% of f
10 Modulation Depth (% of f
11 Reserved
Note: Frequency modulation should be disabled prior to making a change to the DEPTH.
Expected difference value. Writing to this field enables Frequency Modulation (FM). This
bit field holds the expected value of the difference between the reference and feedback
counters. See
to calculate this value. Entering FM calibration mode requires the user to program the EXP
field.
m
m
= F
= F
ref
ref
MCF5235 Reference Manual, Rev. 2
/ 80
/ 40
Section 7.4.5, “Frequency Modulation Depth Calibration,”
sys/2
sys/2
sys/2
) = 0
) = 1.0 ± 0.2
) = 2.0 ± 0.2
Description
Freescale Semiconductor
for details on how