MOD5234-100IR NetBurner Inc, MOD5234-100IR Datasheet - Page 151

• Manufacturer Part Number: MOD5234-100IR
• Description: MOD5234 10/100 ETHERNET MODULE
• Manufacturer: NetBurner Inc
• Type: Controllers & Processorsr

Specifications of MOD5234-100IR

• Interface: I²C, SPI, UART
• Voltage - Supply: 2.5V
• Mounting Type: Surface Mount
• Package / Case: Module
• Product: Modules
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Data Format: -
• Baud Rates: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: Q4483564

7.2.1
This input is driven by an external clock except when used as a connection to the external crystal
when using the internal oscillator.
7.2.2
This output is an internal oscillator connection to the external crystal.
7.2.3
This output reflects the internal bus clock.
7.2.4
The clock mode is selected during reset and reflected in the PLLMODE, PLLSEL, and PLLREF
bits of the synthesizer status. Once reset is exited, the clock mode cannot be changed.
The clock mode selection during reset configuration is summarized in
7.2.5
The RSTOUT pin is asserted by one of the following:
Freescale Semiconductor
• Internal system reset signal
• FRCRSTOUT bit in the reset control status register (RCR); see
Control Register
EXTAL
XTAL
CLKOUT
CLKMOD[1:0]
RSTOUT
CLKMOD[1:0]
RSTOUT
1
CLKMOD[1]
In 1:1 mode for the MCF5235, f
(RCR).”
0
0
1
1
Name
Table 7-2. Signal Properties (Continued)
Signals
Table 7-3. Clock Mode Selection
CLKMOD[0]
MCF5235 Reference Manual, Rev. 2
Clock mode select inputs
Reset signal from reset controller
0
1
0
1
PLL Bypass Mode (external clock mode)
1:1 Mode
Normal mode with external reference
Normal mode with crystal reference
sys
= 2×f
1
ref_1:1
Function
Clock Mode
Table
Section 10.3.1, “Reset
External Signal Descriptions
7-3.
7-7