UPD70F3737GC-UEU-AX Renesas Electronics America, UPD70F3737GC-UEU-AX Datasheet - Page 755

• Manufacturer Part Number: UPD70F3737GC-UEU-AX
• Description: MCU 32BIT V850ES/JX3-L 100-LQFP
• Manufacturer: Renesas Electronics America
• Series: V850ES/Jx3-Lr

Specifications of UPD70F3737GC-UEU-AX

• Package / Case: *
• Voltage - Supply (vcc/vdd): 2.2 V ~ 3.6 V
• Operating Temperature: -40°C ~ 85°C
• Speed: 20MHz
• Number Of I /o: 84
• Core Processor: RISC
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Program Memory Size: 128KB (128K x 8)
• Data Converters: A/D 12x10b, D/A 2x8b
• Oscillator Type: Internal
• Peripherals: DMA, LVD, PWM, WDT
• Connectivity: CSI, EBI/EMI, I²C, UART/USART
• Core Size: 32-Bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

28.4 Rewriting by Dedicated Flash Programmer
the target system (on-board programming). The flash memory can also be rewritten before the device is mounted on
the target system (off-board programming) by using a dedicated program adapter (FA series).
28.4.1 Programming environment
V850ES/JG3-L to perform writing, erasing, etc. A dedicated program adapter (FA series) required for off-board writing.
Note Connect the FLMD1 pin to the flash programmer or connect to GND via a pull-down resistor on the board.
The flash memory can be rewritten by using a dedicated flash programmer after the V850ES/JG3-L is mounted on
The following shows the environment required for writing programs to the flash memory of the V850ES/JG3-L.
A host machine is required for controlling the dedicated flash programmer.
UARTA0, CSIB0, or CSIB3 is used for the interface between the dedicated flash programmer and the
• FA-70F3738GC-UEU-RX (GC-UEU type) (already wired)
• FA-70F3738GF-GAS-RX (GF-GAS type) (already wired)
• FA-100GC-UEU-B (GC-UEU type) (not wired: wiring required)
• FA-100GF-GAS-B (GF-GAS type) (not wired: wiring required)
Note Under development
Remark
The FA series is a product of Naito Densei Machida Mfg. Co., Ltd.
Host machine
Figure 28-2. Environment Required for Writing Programs to Flash Memory
RS-232C
USB
Preliminary User’s Manual U18953EJ1V0UD
CHAPTER 28 FLASH MEMORY
Dedicated flash
programmer
Note
Note
UARTA0/CSIB0/CSIB3
FLMD1
RESET
FLMD0
V
V
DD
SS
Note
V850ES/JG3-L
755