UPD70F3737GC-UEU-AX Renesas Electronics America, UPD70F3737GC-UEU-AX Datasheet - Page 293

• Manufacturer Part Number: UPD70F3737GC-UEU-AX
• Description: MCU 32BIT V850ES/JX3-L 100-LQFP
• Manufacturer: Renesas Electronics America
• Series: V850ES/Jx3-Lr

Specifications of UPD70F3737GC-UEU-AX

• Package / Case: *
• Voltage - Supply (vcc/vdd): 2.2 V ~ 3.6 V
• Operating Temperature: -40°C ~ 85°C
• Speed: 20MHz
• Number Of I /o: 84
• Core Processor: RISC
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Program Memory Size: 128KB (128K x 8)
• Data Converters: A/D 12x10b, D/A 2x8b
• Oscillator Type: Internal
• Peripherals: DMA, LVD, PWM, WDT
• Connectivity: CSI, EBI/EMI, I²C, UART/USART
• Core Size: 32-Bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

7.6
alternate-function pin (TIP10/TIP11) and the peripheral I/O (TMP/UARTA) input signal via the UARTA reception
alternate-function pin (RXDA0/RXDA1).
In the V850ES/JG3-L, the capture trigger input for TMP1 can be selected from the input signal via the port/timer
By using this function, the following is possible.
• The TIP10 and TIP11 input signals of TMP1 can be selected from the port/timer alternate-function pins (TIP10
The capture input for the selector function is specified by the following register.
(1) Selector operation control register 0 (SELCNT0)
and TIP11 pins) and the UARTA reception alternate-function pins (RXDA0 and RXDA1).
→ When the RXDA0 or RXDA1 signal of UART0 or UART1 is selected, the LIN reception transfer rate and baud
Cautions 1. When using the selector function, set the capture trigger input of TMP before connecting
Selector Function
The SELCNT0 register is an 8-bit register that selects the capture trigger for TMP1.
This register can be read or written in 8-bit or 1-bit units.
Reset sets this register to 00H.
rate error of UARTA can be calculated.
SELCNT0
2. When setting the selector function, first disable the peripheral I/O to be connected (TMP or
After reset:
the timer.
UARTA).
Cautions 1. To set ISEL3 and ISEL4 bits to 1, set the corresponding pin in the
ISEL4
ISEL3
00H
0
1
0
1
0
CHAPTER 7 16-BIT TIMER/EVENT COUNTER P (TMP)
TIP11 pin input
RXDA1 pin input
TIP10 pin input
RXDA0 pin input
2. Be sure to clear bits 7 to 5 and 2 to 0 to “0”.
R/W
0
capture input mode.
Preliminary User’s Manual U18953EJ1V0UD
Address:
0
Selection of TIP11 input signal (TMP1)
Selection of TIP10 input signal (TMP1)
FFFFF308H
ISEL4
< >
ISEL3
< >
0
0
0
293