UPD70F3737GC-UEU-AX Renesas Electronics America, UPD70F3737GC-UEU-AX Datasheet - Page 386

• Manufacturer Part Number: UPD70F3737GC-UEU-AX
• Description: MCU 32BIT V850ES/JX3-L 100-LQFP
• Manufacturer: Renesas Electronics America
• Series: V850ES/Jx3-Lr

Specifications of UPD70F3737GC-UEU-AX

• Package / Case: *
• Voltage - Supply (vcc/vdd): 2.2 V ~ 3.6 V
• Operating Temperature: -40°C ~ 85°C
• Speed: 20MHz
• Number Of I /o: 84
• Core Processor: RISC
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Program Memory Size: 128KB (128K x 8)
• Data Converters: A/D 12x10b, D/A 2x8b
• Oscillator Type: Internal
• Peripherals: DMA, LVD, PWM, WDT
• Connectivity: CSI, EBI/EMI, I²C, UART/USART
• Core Size: 32-Bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

8.5.7
is set to 1. Each time the valid edge input to the TIQ0m pin has been detected, the count value of the 16-bit counter is
stored in the TQ0CCRm register, and the 16-bit counter is cleared to 0000H.
signal (INTTQ0CCm) occurs.
TQ0IOC1 register for the unused pins.
clock is fixed to the TIQ00 pin. At this time, clear the TQ0IOC1.TQ0IS1 and TQ0IOC1.TQ0IS0 bits to 00 (capture
trigger input (TIQ00 pin): No edge detected).
386
In the pulse width measurement mode, 16-bit timer/event counter Q starts counting when the TQ0CTL0.TQ0CE bit
The interval of the valid edge can be measured by reading the TQ0CCRm register after a capture interrupt request
Select either of the TIQ00 to TIQ03 pins as the capture trigger input pin. Specify “No edge detected” by using the
When an external clock is used as the count clock, measure the pulse width of the TIQ0k pin because the external
Remark
trigger input)
trigger input)
trigger input)
trigger input)
Pulse width measurement mode (TQ0MD2 to TQ0MD0 bits = 110)
TIQ00 pin
TIQ01 pin
TIQ02 pin
TIQ03 pin
(capture
(capture
(capture
(capture
m = 0 to 3
k = 1 to 3
Figure 8-34. Configuration in Pulse Width Measurement Mode
detector
detector
detector
detector
Edge
Edge
Edge
Edge
CHAPTER 8 16-BIT TIMER/EVENT COUNTER Q (TMQ)
selection
Preliminary User’s Manual U18953EJ1V0UD
Count
TQ0CE
clock
bit
TQ0CCR0
(capture)
register
TQ0CCR1
(capture)
register
TQ0CCR2
(capture)
register
TQ0CCR3
counter
(capture)
16-bit
register
Clear
INTTQ0OV signal
INTTQ0CC0 signal
INTTQ0CC1 signal
INTTQ0CC2 signal
INTTQ0CC3 signal