UPD70F3737GC-UEU-AX Renesas Electronics America, UPD70F3737GC-UEU-AX Datasheet - Page 27

• Manufacturer Part Number: UPD70F3737GC-UEU-AX
• Description: MCU 32BIT V850ES/JX3-L 100-LQFP
• Manufacturer: Renesas Electronics America
• Series: V850ES/Jx3-Lr

Specifications of UPD70F3737GC-UEU-AX

• Package / Case: *
• Voltage - Supply (vcc/vdd): 2.2 V ~ 3.6 V
• Operating Temperature: -40°C ~ 85°C
• Speed: 20MHz
• Number Of I /o: 84
• Core Processor: RISC
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Program Memory Size: 128KB (128K x 8)
• Data Converters: A/D 12x10b, D/A 2x8b
• Oscillator Type: Internal
• Peripherals: DMA, LVD, PWM, WDT
• Connectivity: CSI, EBI/EMI, I²C, UART/USART
• Core Size: 32-Bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

1.6.2
(1) CPU
(2) Bus control unit (BCU)
(3) Flash memory (ROM)
(4) RAM
(5) Interrupt controller (INTC)
(6) Clock generator (CG)
(7) Internal oscillator
(8) Timer/counter
(9) Watch timer
The CPU uses five-stage pipeline control to enable single-clock execution of address calculations, arithmetic
logic operations, data transfers, and almost all other instruction processing.
Other dedicated on-chip hardware, such as a multiplier (16 bits × 16 bits → 32 bits) and a barrel shifter (32
bits) contribute to faster complex processing.
The BCU starts a required external bus cycle based on the physical address obtained by the CPU. When an
instruction is fetched from external memory space and the CPU does not send a bus cycle start request, the
BCU generates a prefetch address and prefetches the instruction code. The prefetched instruction code is
stored in an instruction queue.
This is a 256/128 KB flash memory mapped to addresses 0000000H to 003FFFFH/0000000H to 001FFFFH.
It can be accessed from the CPU in one clock during instruction fetch.
This is a 16/8 KB RAM mapped to addresses 3FFB000H to 3FFEFFFH/3FFD000H to 3FFEFFFH. It can be
accessed from the CPU in one clock during data access.
This controller handles hardware interrupt requests (NMI, INTP0 to INTP7) from on-chip peripheral hardware
and external hardware. Eight levels of interrupt priorities can be specified for these interrupt requests, and
multiplexed servicing control can be performed.
A main clock oscillator and subclock oscillator are provided and generate the main clock oscillation frequency
(f
the main clock frequency (f
The CPU clock frequency (f
An internal oscillator is provided on chip. The oscillation frequency is 220 kHz (TYP). The internal oscillator
supplies the clock for watchdog timer 2 and timer M.
Six-channel 16-bit timer/event counter P (TMP), one-channel 16-bit timer/event counter Q (TMQ), and one-
channel 16-bit interval timer M (TMM), are provided on chip.
This timer counts the reference time period (0.5 s) for counting the clock (the 32.768 kHz subclock or the
32.768 kHz clock f
clock.
Internal units
X
) and subclock frequency (f
BRG
from prescaler 3). The watch timer can also be used as an interval timer for the main
XX
CPU
) as is. In the PLL mode, f
XT
) can be selected from among f
), respectively. There are two modes: In the clock-through mode, f
Preliminary User’s Manual U18953EJ1V0UD
CHAPTER 1 INTRODUCTION
X
is used multiplied by 4.
XX
, f
XX
/2, f
XX
/4, f
XX
/8, f
XX
/16, f
XX
/32, and f
X
is used as
XT
.
27