HD64F2218UTF24 Renesas Electronics America, HD64F2218UTF24 Datasheet - Page 642

• Manufacturer Part Number: HD64F2218UTF24
• Description: IC H8S MCU FLASH 128K 100-TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2200r

Specifications of HD64F2218UTF24

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 24MHz
• Connectivity: SCI, SmartCard, USB
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 69
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 12K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 6x10b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-TQFP, 100-VQFP
• For Use With: 3DK2218-SS - KIT DEV H8S/2218 WINDOWS SIDESHW
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

17.12
In user mode, the flash memory will operate in either of the following states:
• Normal operating mode
• Standby mode
• Power-down state
Table 17.8 shows the correspondence between the operating modes of this LSI and the flash
memory. When the flash memory returns to normal operation from a power-down state, a power
supply circuit stabilization period is needed. When the flash memory returns to its normal
operating state from watch mode or standby mode, bits STS2 to STS0 in SBYCR must be set to
provide a wait time of at least 100 μs; when returns from flash memory module stop mode, the
software wait state should be set.
Table 17.8 Flash Memory Operating States
Rev.7.00 Dec. 24, 2008 Page 586 of 698
REJ09B0074-0700
LSI Operating State
Active mode
Sleep mode
Watch mode
Standby mode
Flash memory module stop
mode
Subactive mode
Subsleep mode
The flash memory can be read and written to.
All flash memory circuits are halted.
The flash memory can be read when part of the power supply circuit is halted and the LSI
operates by subclocks.
Power-Down States for Flash Memory
Flash Memory Operating State
Normal operating mode
Standby mode
(Before entering to the normal operation mode, wait time of at least
100 µs is required.)
Power-down mode (read only)