HD64F2218UTF24 Renesas Electronics America, HD64F2218UTF24 Datasheet - Page 122

• Manufacturer Part Number: HD64F2218UTF24
• Description: IC H8S MCU FLASH 128K 100-TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2200r

Specifications of HD64F2218UTF24

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 24MHz
• Connectivity: SCI, SmartCard, USB
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 69
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 12K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 6x10b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-TQFP, 100-VQFP
• For Use With: 3DK2218-SS - KIT DEV H8S/2218 WINDOWS SIDESHW
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

2.9
2.9.1
Only register ER0, ER1, ER4, or ER5 should be used when using the TAS instruction. The TAS
instruction is not generated by the Renesas Technology H8S and H8/300 Series C/C++ compilers.
If the TAS instruction is used as a user-defined intrinsic function, ensure that only register ER0,
ER1, ER4, or ER5 is used.
2.9.2
With the STM or LDM instruction, the ER7 register is used as the stack pointer, and thus cannot
be used as a register that allows save (STM) or restore (LDM) operation.
With a single STM or LDM instruction, two to four registers can be saved or restored. The
available registers are as follows:
For two registers: ER0 and ER1, ER2 and ER3, or ER4 and ER5
For three registers: ER0 to ER2, or ER4 to ER6
For four registers: ER0 to ER3
For the Renesas Technology H8S or H8/300 Series C/C++ Compiler, the STM/LDM instruction
including ER7 is not created.
2.9.3
Using bit manipulation instructions on registers containing write-only bits can result in the bits that
should have been manipulated not being manipulated as intended or in the wrong bits being
manipulated.
Reading data from a register containing write-only bits may return fixed or undefined values.
Consequently, bit manipulation instructions that use the read values to perform operations (BNOT,
BTST, BAND, BIAND, BOR, BIOR, BXOR, BIXOR, BLD, and BILD) will not work properly.
In addition, bit manipulation instructions that write data following operations based on the data
values read (BSET, BCLR, BNOT, BST, and BIST) may change the values of bits unrelated to the
intended bit manipulation. Therefore, caution is necessary when using bit manipulation
instructions on registers containing write-only bits.
Rev.7.00 Dec. 24, 2008 Page 66 of 698
REJ09B0074-0700
Usage Notes
Note on TAS Instruction Usage
STM/LTM Instruction Usage
Note on Bit Manipulation Instructions