HD64F2218UTF24 Renesas Electronics America, HD64F2218UTF24 Datasheet - Page 432

• Manufacturer Part Number: HD64F2218UTF24
• Description: IC H8S MCU FLASH 128K 100-TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2200r

Specifications of HD64F2218UTF24

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 24MHz
• Connectivity: SCI, SmartCard, USB
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 69
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 12K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 6x10b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-TQFP, 100-VQFP
• For Use With: 3DK2218-SS - KIT DEV H8S/2218 WINDOWS SIDESHW
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

Legend:
×: Don’t care
Rev.7.00 Dec. 24, 2008 Page 376 of 698
REJ09B0074-0700
Bit
3
2
1
0
Bit Name Initial Value
MPIE
TEIE
CKE1
CKE0
0
0
0
0
R/W
R/W
R/W
R/W
Description
Multiprocessor Interrupt Enable (enabled only when the MP
bit in SMR is 1 in asynchronous mode)
Write 0 to this bit in Smart Card interface mode.
When receive data including MPB = 0 is received, receive
data transfer from RSR to RDR, receive error detection,
and setting of the RERF, FER, and ORER flags in SSR,
are not performed.
When receive data including MPB = 1 is received, the MPB
bit in SSR is set to 1, the MPIE bit is cleared to 0
automatically, and generation of RXI and ERI interrupts
(when the TIE and RIE bits in SCR are set to 1) and FER
and ORER flag setting are enabled.
Transmit End Interrupt Enable
Write 0 to this bit in Smart Card interface mode.
TEI cancellation can be performed by reading 1 from the
TDRE flag in SSR, then clearing it to 0 and clearing the
TEND flag to 0, or clearing the TEIE bit to 0.
Clock Enable 0 and 1
Enables or disables clock output from the SCK pin. The
clock output can be dynamically switched in GSM mode.
For details, refer to section 12.7.9, Clock Output Control.
When the GM bit in SMR is 0:
00: Output disabled (SCK pin can be used as an I/O port
01: Clock output
1×: Reserved
When the GM bit in SMR is 1:
00: Output fixed low
01: Clock output
10: Output fixed high
11: Clock output
pin)