AT91SAM9G10-EK Atmel, AT91SAM9G10-EK Datasheet - Page 591

• Manufacturer Part Number: AT91SAM9G10-EK
• Description: KIT DEV FOR SAM9G10 ARM
• Manufacturer: Atmel
• Type: MCUr

Specifications of AT91SAM9G10-EK

• Contents: Board, Cables, Power Supply
• Silicon Manufacturer: Atmel
• Core Architecture: AVR
• Kit Contents: Board
• Svhc: No SVHC (15-Dec-2010)
• Mcu Supported Families: AT91SAM9G10, ARM926EJ-S
• Tool / Board Applications: Microcontroller
• Rohs Compliant: Yes
• For Use With/related Products: *
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

37. USB Device Port (UDP
37.1
Table 37-1.
Note:
6462A–ATARM–03-Jun-09
Endpoint Number
0
1
2
3
4
5
Description
1. The Dual-Bank function provides two banks for an endpoint. This feature is used for ping-pong mode.
USB Endpoint Description
Mnemonic
The USB Device Port (UDP) is compliant with the Universal Serial Bus (USB) V2.0 full-speed
device specification.
Each endpoint can be configured in one of several USB transfer types. It can be associated with
one or two banks of a dual-port RAM used to store the current data payload. If two banks are
used, one DPR bank is read or written by the processor, while the other is read or written by the
USB device peripheral. This feature is mandatory for isochronous endpoints. Thus the device
maintains the maximum bandwidth (1M bytes/s) by working with endpoints with two banks of
DPR.
Suspend and resume are automatically detected by the USB device, which notifies the proces-
sor by raising an interrupt. Depending on the product, an external signal can be used to send a
wake up to the USB host controller.
EP0
EP1
EP2
EP3
EP4
EP5
Dual-Bank
Yes
Yes
Yes
Yes
No
No
(1)
Max. Endpoint Size
256
256
64
64
64
8
AT91SAM9G10
Control/Bulk/Interrupt
Control/Bulk/Interrupt
Bulk/Iso/Interrupt
Bulk/Iso/Interrupt
Bulk/Iso/Interrupt
Bulk/Iso/Interrupt
Endpoint Type
591