AT91SAM9G10-EK Atmel, AT91SAM9G10-EK Datasheet - Page 156

• Manufacturer Part Number: AT91SAM9G10-EK
• Description: KIT DEV FOR SAM9G10 ARM
• Manufacturer: Atmel
• Type: MCUr

Specifications of AT91SAM9G10-EK

• Contents: Board, Cables, Power Supply
• Silicon Manufacturer: Atmel
• Core Architecture: AVR
• Kit Contents: Board
• Svhc: No SVHC (15-Dec-2010)
• Mcu Supported Families: AT91SAM9G10, ARM926EJ-S
• Tool / Board Applications: Microcontroller
• Rohs Compliant: Yes
• For Use With/related Products: *
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

21.7.6.2
156
AT91SAM9G10
Software Configuration
The following configuration has to be performed:
• Assign the EBI CS4 and/or EBI_CS5 to the CompactFlash Slot 0 or/and Slot 1 by setting the
• The address line A23 is to select I/O (A23=1) or Memory mode (A23=0) and the address line
• A23, CFRNW, CFS0, CFCS1, CFCE1 and CFCE2 signals are multiplexed with PIO lines and
• Configure a PIO line as an output for CFRST and two others as an input for CFIRQ and
• Configure SMC CS4 and/or SMC_CS5 (for Slot 0 or 1) Setup, Pulse, Cycle and Mode
bit EBI_CS4A or/and EBI_CS5A in the EBI Chip Select Assignment Register located in the
bus matrix memory space.
A22 for REG function.
thus the dedicated PIOs must be programmed in peripheral mode in the PIO controller.
CARD DETECT functions respectively.
accordingly to Compact Flash timings and system bus frequency.
6462A–ATARM–03-Jun-09