s5u1c33000c Epson Electronics America, Inc., s5u1c33000c Datasheet - Page 471

• Manufacturer Part Number: s5u1c33000c
• Description: Cmos 32-bit Single Chip Microcomputer S5u1c33000c Manual
• Manufacturer: Epson Electronics America, Inc.

Explanation of contents
S5U1C33000C MANUAL
(C COMPILER PACKAGE FOR S1C33 FAMILY) (Ver. 4)
(1) Chip name
(2) Internal ROM size
(3) Option size
(4) S5U1C33xxxP board version
(5) S5U1C33xxxP status
(6) MCU/MPU mode
(7) Parameter file version
Write a chip name.
CHIP <chip name>
Write the internal ROM size.
IROM <size>
Only a hexadecimal number can be used to write the size. (The "0x" is unnecessary.)
The specified sized area that begins from address 0x80000 is mapped as the internal ROM area. If 0 is
specified, size = 0 (internal ROM is not used).
Write the size (up to 16KB) of the function options set for each model.
FOPT <size>
Only a hexadecimal number can be used to write the size. (The "0x" is unnecessary.)
Write a version range of the S5U1C33xxxP board matched to the model being developed.
PRC VER <version (1)> <version (2)>
Write a small version number for version (1) and a larger one for version (2) using an 8-bit hexadecimal
number. If the model corresponds to only one version of S5U1C33xxxP board, write the same value for
both.
When the db33 is started up in the ICE mode, it checks the S5U1C33xxxP board version, and if the
mounted S5U1C33xxxP board does not fall within the range of version (1) to version (2), it issues a
warning. For S5U1C33xxxP board versions matched to each model, refer to the manual of the
S5U1C33xxxP board. When version (1) is set to 00 and version (2) is set to ff, any version of the
S5U1C33xxxP board is permitted to use for debugging.
Specify the S5U1C33xxxP board's status bits to be checked at startup in the ICE mode.
PRC STATUS <bit 15><bit 14>...<bit 0>
Specify 1, 0, or * for 16 status bits. If you specify 1 or 0 and the S5U1C33xxxP board's corresponding status
bit is found to be different from that found in a startup check, the db33 issues a warning. If you specify an
asterisk (*) for a bit, the bit is masked and is not checked. For details on how to set the status bits, refer to
the manual of the S5U1C33xxxP board. When all the bits are specified with *, the S5U1C33xxxP board is
permitted to use for debugging regardless of the status bits.
Specify whether you want the CPU to be started up in the MCU mode (booted from 0x80000 of internal
ROM) or in the MPU mode (booted from 0xc00000 of external ROM).
This specification is valid in the simulator mode.
Write the version of the parameter file.
VER <version>
Use a hexadecimal number 0 to ff for this specification. This is provided for version management by the
user.
To specify the MCU mode:
To specify the MPU mode:
MCU
MPU
EPSON
CHAPTER 16: DEBUGGER
455