s5u1c33000c Epson Electronics America, Inc., s5u1c33000c Datasheet - Page 199

• Manufacturer Part Number: s5u1c33000c
• Description: Cmos 32-bit Single Chip Microcomputer S5u1c33000c Manual
• Manufacturer: Epson Electronics America, Inc.

12.2.1 Input Files
Object file
Library file
Linker command file
Absolute object file
12.2.2 Output Files
Absolute object file
Link map file
S5U1C33000C MANUAL
(C COMPILER PACKAGE FOR S1C33 FAMILY) (Ver. 4)
File format:
File name:
Description:
File format:
File name:
Description:
File format:
File name:
Description:
File format:
File name:
Description:
File format:
File name:
Output destination: Current directory
Description:
For the contents of the output object file, refer to Appendix,"srf33 File Structure".
File format:
File name:
Output destination: Current directory
Description:
Binary file in srf33 format
<File name>.o
Object file of individual modules created by the Assembler as33.
Binary file in library format
<File name>.lib
ANSI library files, emulation library files and user library files created by the
Librarian lib33.
Text file
<File name>.cm
File to specify object file names to be input and the start address of each section.
Since the template of a command file is created by [Make edit] of the wb33, correct it
with a general-purpose editor before use.
It is input to the lk33 when the -c startup option is specified.
For its contents, refer to Section 12.5.1 (for Ver. 2.1 or earlier) or 12.6.1 (for Ver. 3.0),
"Linker Commands".
Binary file in srf33 format
<File name>.srf
Executable object file generated by the Linker lk33. This file can be linked only when
the -inclink option is specified. Note that ".srf" files cannot be relocated by specifying
an address since those absolute addresses have been decided.
Furthermore, the absolute object file for the loader that was generated with the -ld
option cannot be linked.
Binary file in srf33 format
<File name>.srf
Object file in executable format that can be input in the Debugger db33. All the
modules comprising one program are linked together in the file, and the absolute
addresses that all the codes will be mapped are determined. It also contains the
necessary debugging information in srf33 format.
The file name is decided in the following manner:
In case of one single module:
When link command files are input:
Text file
<File name>.map
Mapping information file showing from which address of a section each input file was
mapped. The file is delivered when the -m startup option is specified.
This file is used to optimize the codes by the Instruction Extender ext33.
The same name as the input object file.
The same name as that of the file to be linked first, or a name specified by the
command.
EPSON
(Common explanation for all versions)
CHAPTER 12: LINKER
183