s5u1c33000c Epson Electronics America, Inc., s5u1c33000c Datasheet - Page 369

• Manufacturer Part Number: s5u1c33000c
• Description: Cmos 32-bit Single Chip Microcomputer S5u1c33000c Manual
• Manufacturer: Epson Electronics America, Inc.

rs (register set)
This command modifies the register values.
(1) rs
(2) rs <name> <data>
Format 1) The name of each register and its current value are displayed as guidance. Skip the register that you
Format 2)
S5U1C33000C MANUAL
(C COMPILER PACKAGE FOR S1C33 FAMILY) (Ver. 4)
Function
Formats
Input examples
Notes
An error results if you input a value exceeding the effective bit size of the register/flag. In Format 1, a
guidance is displayed prompting you to input data again. In Format 2, command input is canceled.
The set value of the PC is forcibly rounded down to 16-bit boundaries (LSB = 0). Even when an odd address is
specified, no error is assumed.
The set value of the SP is forcibly rounded down to 32-bit boundaries (low-order 2 bits = 0).
<name>: Register name or flag name
<data>: Data to be set (hexadecimal)
do not want to be modified by hitting the [Enter] key only. Input a new value using a hexadecimal
number for the register that you do want to be modified. You also can use the [^] key (returns to the
previous address) and the [q] key (quit).
After you execute the command, the [Register] window is updated to show the contents you have
input.
If you used the [q] key to stop entering in the middle, the contents input up to that time are updated.
Error: Invalid value.
(guidance mode)
(direct input mode)
...R0 register is modified.
...C flag is set.
EPSON
CHAPTER 16: DEBUGGER
[ICD /ICE / SIM / MON]
353