s5u1c33000c Epson Electronics America, Inc., s5u1c33000c Datasheet - Page 276

• Manufacturer Part Number: s5u1c33000c
• Description: Cmos 32-bit Single Chip Microcomputer S5u1c33000c Manual
• Manufacturer: Epson Electronics America, Inc.

CHAPTER 16: DEBUGGER
16.3.3 Startup Messages
When the db33 starts up, it outputs the following message in the [Command] window.
When starting up in ICE mode (with -ice option specified, default)
260
When the db33 starts up in ICE mode, it first performs the tests and initializing operations described below
then displays the above message.
1. Test the S5U1C33104H connections.
2. Read a parameter file and check its contents.
3. Read and check the hardware version.
4. Initialize the S5U1C33104H.
5. Mapping
6. Reset the S5U1C33104H.
7. Initialize debugging information.
If an error or warning appears during any of the above processes, the db33 halts subsequent processing after
displaying an error or warning message. In this case, quit the db33 temporarily, and eliminate the cause of
error before restarting the db33.
Before starting up the db33 in ICE mode, please be sure to check the following:
The S5U1C33104H is connected to your computer with the designated RS-232C cable and parallel cable.
Ports are specified correctly.
The baud rate is set correctly.
The S5U1C33xxxP board is mounted correctly in place.
The power of the S5U1C33104H is turned on.
The S5U1C33104H and S5U1C33xxxP board are not in a reset condition.
The S5U1C33104H is not in the free-run or self-diagnostic mode.
The specified COM and LPT ports are not used in other applications.
EPSON
(C COMPILER PACKAGE FOR S1C33 FAMILY) (Ver. 4)
S5U1C33000C MANUAL