s5u1c33000c Epson Electronics America, Inc., s5u1c33000c Datasheet - Page 277

• Manufacturer Part Number: s5u1c33000c
• Description: Cmos 32-bit Single Chip Microcomputer S5u1c33000c Manual
• Manufacturer: Epson Electronics America, Inc.

When starting up in ICD mode (with -icd option specified)
When starting up in debug monitor mode (with -mon option specified)
S5U1C33000C MANUAL
(C COMPILER PACKAGE FOR S1C33 FAMILY) (Ver. 4)
When the db33 starts up in ICD mode, it first performs the tests and initializing operations described below
then displays the above message.
1. Test the S5U1C33000H connections.
2. Read a parameter file and check its contents.
3. Initialize the S5U1C33000H.
4. Initialize debugging information.
If an error or warning appears during any of the above processes, the db33 halts subsequent processing after
displaying an error or warning message. In this case, quit the db33 temporarily, and eliminate the cause of
error before restarting the db33.
Before starting up the db33 in ICD mode, please be sure to check the following:
When the db33 starts up in debug monitor mode, it first performs the tests described below then displays
the above message.
1. Test the S5U1C330M2S connections.
2. Read a parameter file and check its contents.
3. Initialize debugging information.
If an error or warning appears during any of the above processes, the db33 halts subsequent processing after
displaying an error or warning message. In this case, quit the db33 temporarily, and eliminate the cause of
error before restarting the db33.
The S5U1C33000H is connected to your computer with the designated RS-232C cable and parallel cable.
Ports are specified correctly.
The baud rate is set correctly.
The target board is connected correctly.
The power of the S5U1C33000H and target board are turned on.
The specified COM and LPT ports are not used in other applications.
EPSON
(when you set S5U1C33001M1 in the parameter file)
CHAPTER 16: DEBUGGER
261