s5u1c33000c Epson Electronics America, Inc., s5u1c33000c Datasheet - Page 264

• Manufacturer Part Number: s5u1c33000c
• Description: Cmos 32-bit Single Chip Microcomputer S5u1c33000c Manual
• Manufacturer: Epson Electronics America, Inc.

CHAPTER 14: BINARY/HEX CONVERTER
14.6 Error/Warning Messages
Error and warning messages are displayed/output through the Standard Output (stdout). If you specify the -e
option, the messages will also be delivered in the "hex33.err" file.
If the hex33 is started up using the wb33's [HEX33] button, the message is output to "wb33.err". When execution
is completed, a message is displayed in the output window (default).
14.6.1 Errors
The errors produced in the hex33 are classified into two groups: system errors and input file format errors.
When an error occurs, the hex33 immediately terminates the processing after displaying an error message. It will
not output any HEX file.
14.6.2 Warning
Even if a warning is issued, the hex33 keeps on processing, and completes the processing after displaying a
warning message, unless any error is produced in addition. It will output the HEX file.
248
Error: File open error.
Error: File write error.
Error: File read error.
Error: Memory allocation error.
Error: "<file name>" file could not be opened.
Error: Input file is not SRF33 file.
Error: Start address error.
Error: End address error.
Error: Out of area in address <address>.
Error: Chain information size is greater than file size.
Error: Chain seek address is greater than file size.
Error: File control flag error.
Error: Section address error.
Error: Section ID error.
Error: Data conflicted at <address>.
Warning: Section information chain is not found.
Warning message
Error message
Error message
Table 14.6.1.2 List of input file error messages
Table 14.6.1.1 List of system error messages
Table 14.6.2.1 Warning message
EPSON
Cannot open the file.
Cannot write to the file.
Cannot read the file.
Cannot secure memory space.
Cannot open the file <file name>.
The input file is not an object file in srf33 format.
The conversion start address is invalid. The specified
address either exceeds the effective range of
0x00000000 to 0x0fffffff or does not reside on 32-byte
boundaries.
The conversion end address is invalid. The specified
address either exceeds the effective range of
0x00000000 to 0x0fffffff or does not reside on 32-byte
boundaries.
The converted data exceeded a specified address range.
These errors occur when the input srf33 object files
contain erroneous information. Check all the files from the
source to the linked files for consistency. If necessary,
reprocess from the C Compiler and Preprocessor using
the final source files.
There is no section information chain in the input file. This
warning is produced when the input srf33 object files
contain erroneous information. Check all the files from the
source to the linked files for consistency. If necessary,
reprocess from the C Compiler and Preprocessor using
the final source files.
(C COMPILER PACKAGE FOR S1C33 FAMILY) (Ver. 4)
Content
Content
Content
S5U1C33000C MANUAL