peb3456e Infineon Technologies Corporation, peb3456e Datasheet - Page 218

• Manufacturer Part Number: peb3456e
• Description: Channelized T3 Termination, With Ds3 Framer, M13 Multiplexer, T1/e1 Framers And 256-channel Hdlc/ppp Controller
• Manufacturer: Infineon Technologies Corporation

CONF2
Configuration Register 2
Access
Address
Reset Value
SYSQ
PORTQ(2:0)
TBE
RSPEN
Data Sheet
RCL
31
15
0
30
0
SYSQ(2:0)
13
0
: read/write
: 044
: 00000000
System Interrupt Queue
SYSQ sets up the interrupt queue where system interrupt vectors will be
written to. One system interrupt queue can be selected for system
interrupts.
Port Interrupt Vector Queue
PORTQ sets up the interrupt queue where port interrupt vectors will be
written to. One interrupt queue can be selected for port interrupts.
Test Breakout Enable
This bit enables the test breakout function. The incoming signals of the
port selected via LPID are switched to the test ports and the incoming
signals on the test port replace the output signals of the selected port.
Setting TBE enables the selected port (tri-state no longer active) and has
priority over functions selected in register PMR and priority over bit
RSPEN. The port may be disabled using register REN and TEN to
disable internal processing while test function is active.
0
1
Receive Synchronization Pulse Enable
0
28
12
H
Disable test function.
Enable test function.
The selected transmit clock of port zero is visible on pin TCLKO.
This function is available when port zero is operated in
unchannelized mode.
27
0
LPID(4:0)
H
26
PORTQ(2:0)
24
8
218
23
7
TBE
22
RSPEN
21
LCID(7:0)
20
Register Description
SPA(4:0)
PEB 3456 E
05.2001
16
0