MPC564CZP40 Freescale Semiconductor, MPC564CZP40 Datasheet - Page 1232

• Manufacturer Part Number: MPC564CZP40
• Description: IC MPU 32BIT W/CODE COMP 388PBGA
• Manufacturer: Freescale Semiconductor
• Series: MPC5xxr

Specifications of MPC564CZP40

• Core Processor: PowerPC
• Core Size: 32-Bit
• Speed: 40MHz
• Connectivity: CAN, EBI/EMI, SCI, SPI, UART/USART
• Peripherals: POR, PWM, WDT
• Number Of I /o: 56
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 2.5 V ~ 2.7 V
• Data Converters: A/D 32x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 388-BGA
• Processor Series: MPC5xx
• Core: PowerPC
• Data Bus Width: 32 bit
• Data Ram Size: 32 KB
• Interface Type: CAN, JTAG, QSPI, SCI, SPI, UART
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 56
• Number Of Timers: 2
• Operating Supply Voltage: 0 V to 5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 2 (10 bit, 32 Channel)
• For Use With: MPC564EVB - KIT EVAL FOR MPC561/562/563/564
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: No

Electrical Characteristics
The option B power-up sequence (excluding V
Thus the V
no adverse affects to the device.
The requirement that V
dual 2.6-V/5-V compliant pins and 2.6-V pins. The diodes are forward biased when V
V
Figure F-5
power-up sequence if a keep-alive supply is required. The keep-alive supply should be powered-up at the
same time or before both the high voltage and low voltage supplies are powered-up.
The option B power-down sequence (excluding V
F-16
DDH
1. V
1. The V
and will start to conduct current.
group, with no adverse affects to the device.
DDH
DDH
illustrates the power-up sequence if no keep-alive supply is required.
V
DDL
> V
DDKA
supply group can be fully powered-up prior to power-up of the V
DDL
supply group can be fully powered-down prior to power-down of the V
Figure F-5. Option B Power-Up Sequence Without Keep-Alive Supply
Figure F-6. Option B Power-Up Sequence With Keep-Alive Supply
- 0.5 V (V
DDH
V
DDH
V
cannot lag V
DDH
cannot lag V
cannot lag V
MPC561/MPC563 Reference Manual, Rev. 1.2
DDH
cannot lag V
DDL
DDL
DDL
by more than 0.5 V
by more than 0.5 V is due to ESD diodes in the pad logic for
by more than 0.5 V
DDKA
DDKA
DDL
) is:
by more than 0.5 V)
0.5-V lag
0.5-V lag
) is:
Figure F-6
DDL
V
V
Freescale Semiconductor
DDH
DDL
V
V
supply group, with
DDL
DDH
DDL
DDH
is greater than
illustrates the
supply