SAF-C164SM Infineon Technologies, SAF-C164SM Datasheet - Page 317

• Manufacturer Part Number: SAF-C164SM
• Description: 16-Bit CMOS Microcontroller
• Manufacturer: Infineon Technologies

Bit
BCPOL
BCEM
Note: When a multi-channel PWM mode is initiated the first time after reset, CC6MCON
User’s Manual
must be written twice: The first write operation is with bit BCEN cleared and all
other bits set/cleared as required (BCM must be ‘00’ for idle mode), the second
write operation has the same CC6MCON bit pattern as the first write operation but
with BCEN set. After this second CC6MCON write operation, timer T12 can be
started (setting CT12R in CTCON) and thereafter BCM can be put into a mode
other than the idle mode.
Function
Machine polarity (Valid only in multi-channel PWM mode)
0:
1:
Error mode select bit (Valid only in block commutation mode)
0:
1:
Only the COUT6n outputs are switched to the timer T13 output
signal during the active phase in multi-channel PWM mode.
CMSELn3 must be set for that functionality.
All enabled compare outputs COUT6n and CC6n are switched to
the timer T13 output signal during their active phase in multi-
channel PWM mode.
A “wrong follower” condition is not notified as an error.
A “wrong follower” condition in rotate right or rotate left mode sets
flag BCERR if EBCE is set.
17-28
Capture/Compare Unit CAPCOM6
C164CM/C164SM
Derivatives
V1.0, 2002-02