SPAKDSP303AG100 Freescale Semiconductor, SPAKDSP303AG100 Datasheet - Page 143

• Manufacturer Part Number: SPAKDSP303AG100
• Description: IC DSP 24BIT 100MHZ 144-LQFP
• Manufacturer: Freescale Semiconductor
• Series: DSP563xxr
• Type: Fixed Pointr

Specifications of SPAKDSP303AG100

• Interface: Host Interface, SSI, SCI
• Clock Rate: 100MHz
• Non-volatile Memory: ROM (576 B)
• On-chip Ram: 24kB
• Voltage - I/o: 3.30V
• Voltage - Core: 3.30V
• Operating Temperature: -40°C ~ 100°C
• Mounting Type: Surface Mount
• Package / Case: 144-LQFP
• Device Core Size: 24b
• Clock Freq (max): 100MHz
• Mips: 100
• Device Input Clock Speed: 100MHz
• Ram Size: 24KB
• Operating Supply Voltage (typ): 3.3V
• Operating Supply Voltage (min): 3V
• Operating Supply Voltage (max): 3.6V
• Operating Temp Range: -40C to 100C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 144
• Package Type: LQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

7.4.6 Word Length Frame Sync and Data Word Timing
The CRB[FSR] bit controls the relative timing of the word length frame sync relative to the data
word timing.
CRB[FSR] is ignored when a bit length frame sync is selected.
7.4.7 Frame Sync Polarity
The CRB[FSP] bit controls the polarity of the frame sync.
The ESSI receiver looks for a receive frame sync edge (leading edge if CRB[FSP] is cleared,
trailing edge if FSP is set) only when the previous frame is completed. If the frame sync is
asserted before the frame is completed (or before the last bit of the frame is received in the case
of a bit frame sync or a word-length frame sync with CRB[FSR] set), the current frame sync is
not recognized, and the receiver is internally disabled until the next frame sync.
Frames do not have to be adjacent; that is, a new frame sync does not have to follow the previous
frame immediately. Gaps of arbitrary periods can occur between frames. All the enabled
transmitters are tri-stated during these gaps.
7.4.8 Byte Format (LSB/MSB) for the Transmitter
Some devices, such as CODECs, require a MSB-first data format. Other devices, such as those
that use the AES–EBU digital audio format, require the LSB first. To be compatible with all
formats, the shift registers in the ESSI are bidirectional. You select either MSB or LSB by
programming CRB[SHFD].
Freescale Semiconductor
If CRB[FSL0] is set, RX and TX have different frame sync lengths. CRB[FSL0] is
ignored when CRB[SYN] is set.
When CRB[FSR] is cleared, the word length frame sync is generated (or expected) with
the first bit of the data word.
When CRB[FSR] is set, the word length frame sync is generated (or expected) with the
last bit of the previous word.
When CRB[FSP] is cleared, the polarity of the frame sync is positive; that is, the frame
sync signal is asserted high. The ESSI synchronizes on the leading edge of the frame sync
signal.
When CRB[FSP] is set, the polarity of the frame sync is negative; that is, the frame sync is
asserted low. The ESSI synchronizes on the trailing edge of the frame sync signal.
If CRB[SHFD] is cleared, data is shifted into the receive shift register MSB first and
shifted out of the transmit shift register MSB first.
If CRB[SHFD] is set, data is shifted into the receive shift register LSB first and shifted out
of the transmit shift register LSB first.
DSP56303 User’s Manual, Rev. 2
Operating Modes: Normal, Network, and On-Demand
7-11