C500CP131 Omron, C500CP131 Datasheet - Page 83

• Manufacturer Part Number: C500CP131
• Description: C-SERIES SPECIAL I/O UNIT
• Manufacturer: Omron

Specifications of C500CP131

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Programming in Ladder Form
Moving the Cursor
3-5-1 Entering Ladder Diagrams
Entering Conditions
Address
1, 2, 3...
1, 2, 3...
The ladder diagram contains a maximum of 22 instruction lines, but some of
these may not be visible on the screen. The maximum number of lines on the
screen in each display mode are as follows:
To enable entering ladder diagrams, press the F1 Key to select the write editing
mode. The write mode will be displayed at the top-right of the screen.
The cursor will be displayed at the first line, address 000000. If a program al-
ready exists at the cursor position, the symbol and bit address will appear in the
input area at the bottom of the screen. Enter conditions on the ladder diagram
using the following procedure:
1. Press the Up and Down Keys to move the cursor up and down.
2. Press the Left key to move the cursor left. From the left edge of the sheet, the
3. Press the Right key to move the cursor right. From the right edge of the
1. Move the cursor to the required position.
2. Press a function key to enter the required condition. The selected symbol
cursor will move to the right edge.
sheet, the cursor will move to the left edge.
Ladder (Addr, I/Oname):
Ladder (I/Oname):
Ladder (Addr):
Ladder (I/O comment 2):
Ladder (I/O comment 4):
will appear in the input area.
Cursor
Input area
Editing mode
5 lines
7 lines
10 lines
4 lines
3 lines
Program display mode
Program input mode
Memory block (ladder),
Step number,
Action number,
Transition number
Menu name
Section 3-5
77