C500CP131 Omron, C500CP131 Datasheet - Page 40

• Manufacturer Part Number: C500CP131
• Description: C-SERIES SPECIAL I/O UNIT
• Manufacturer: Omron

Specifications of C500CP131

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Editing Action Blocks
2-6-1 Writing Actions
Writing AQ
Writing SV
34
Auxiliary
area
For inputting action
bit addresses
CPU bus
link area
1, 2, 3...
Timer
or
The AQ, SV, action, and FV can only be entered in the spaces marked by aster-
isks (
blank line and press the F9 key to display asterisks in the spaces to permit data
to be written. The cursor can only be moved to the top blank line.
Press the Esc Key or Shift+Esc Keys to cancel the AQ input. This hides the AQ
table and locks the cursor in the action block.
An SV must be input when one of the following AQ is written: D, DH, L, LH, SD,
DS, SL The SV can be specified as a constant or a word. The setting ranges are
defined below.
The using for setting the SV can be changed to 1 s using the Step Timer setting in
the PC Setup. The relationships between the AQ operations and the SVs are
shown following the display below.
1. Move the cursor to the AQ column where the asterisks (
2. Select the required AQ with the cursor and press the Enter Key. The AQ
Counter
and press the Enter Key. The AQ table will be displayed at the left of the
screen.
table will disappear and the selected AQ will be displayed at the cursor posi-
tion. The cursor will move to the SV column.
Constant:0000 to 9999 (default unit: 0.1 s)
Word:
Insertion point
). It is not possible to enter data in blank spaces. Move the cursor to a
Contents of word must be between 0000 and 7FFD (0 to 32765)
DM area
EM area
Input area
Section 2-6
) are displayed
Function
key
menu