C500CP131 Omron, C500CP131 Datasheet - Page 105

• Manufacturer Part Number: C500CP131
• Description: C-SERIES SPECIAL I/O UNIT
• Manufacturer: Omron

Specifications of C500CP131

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Creating Block Comments
Finding Comments
3-5-4 Including I/O Comments in Ladder Diagrams
3-6
Creating Block Comments
1, 2, 3...
Finding the I/O Comment “SW1”
Press F6, Caps_Lock, SW1, and Enter.
Finding the Block Comment “Manufacturing process control block”
Press Shift+F2, Menu, and Enter.
I/O comments can be input or changed during ladder diagram input or debug-
ging. Although I/O comments can also be input or changed using the I/O com-
ment operation, this section described inputting them directly while inputting the
ladder diagram. It makes no difference whether I/O comments are entered here
or in the I/O comment operation, and all comments input while programming are
automatically entered into the I/O comment table.
I/O comments will be displayed when input in the “Ladder (I/O comment 2)” (2
lines of comments) or “Ladder (I/O comment 4)” (4 lines of comments) display
mode, but not in any other mode.
I/O comments can be up to 30 characters long, but only 10 characters are dis-
played on 2 lines of comments and only 20 characters are displayed on 4 lines of
comments.
The basic procedure is as follows:
Block comments can be created in the Ladder (Addr, I/Oname), Ladder (I/O
comment 2), and Ladder (I/O comment 4) display modes. Block comments
1. Input “H:Change Display” from the programming menu.
2. Specify either“C:Ladder (I/O comment 2)” or “M:Ladder (I/O comment 4).”
3. If not already in the write mode, press the F1 Key.
4. Input the instructions and the I/O bit address. Example: F7, 0, CR. The I/O
5. Input the I/O comments and press the Enter Key. Example: START, CR.
comment input area will appear at the lower right of the screen.
000
0000
000020
000
START
0000
00
0100
13
(090)
INC
Section 3-6
G010
99