C500CP131 Omron, C500CP131 Datasheet - Page 116

• Manufacturer Part Number: C500CP131
• Description: C-SERIES SPECIAL I/O UNIT
• Manufacturer: Omron

Specifications of C500CP131

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Changing Addresses
Changing I/O Names and Comments
Procedure
110
1, 2, 3...
In the following example, CIO 0001 is changed to G008, and as a result, CIO
000101 is also changed to G00801.
I/O names and comments are handled the same as for when changing bit ad-
dresses, except that both bit and word addresses are affected. Refer to the pre-
vious section for details.
or
1. Select “N:Change data word” from the menu.
2. Select “W:Wd adr(with bit adr)” from the sub-menu.
3. Enter the first address to be changed and press the Enter Key.
4. To change only one word, press the Enter Key.
5. Enter the new word address.
6. Set whether or not bit addresses with I/O names are to be changed.
7. Set whether the I/O comments are to be changed.
8. Select Y at “OK?” and then to execute the change press the Enter Key in
To make multiple changes, enter the last address to be changed.
The start and end word address must be in the same data area, and the end
address must be greater than the start address.
When changing multiple words, enter the new address for the first address.
response to the confirmation message.
A message will flash to indicate that the changes are being made and the
program name will be displayed. The message and program name will be
cleared from the screen when the changes are complete.
I0001
G008
01
01
CMP
CMP
(020)
(020)
I0000
I0000
G008
I0001
0001 to G008
Section 3-8