C500CP131 Omron, C500CP131 Datasheet - Page 235

• Manufacturer Part Number: C500CP131
• Description: C-SERIES SPECIAL I/O UNIT
• Manufacturer: Omron

Specifications of C500CP131

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

PC Setup
Startup Hold
Startup Mode
Startup Processing
230
Hold Bits The following display will appear if “R:Hold bits” is selected. Move the
cursor to the numbers of the Racks for which outputs are to be held and press
Enter Key to display them in reverse video.
There are three bits in the Auxiliary Area that can be used to preserve status
when power is turned off and on. These bits will themselves be reset and thus
ineffective unless the following settings are used maintain status. To change a
setting, select the item and select the desired treatment.
Forced status: Set to Yes to maintain the Forced Status Hold Bit (A00013)
I/O bits: Set to Yes to maintain the IOM Hold Bit (A00012)
Power on flag: Set to Yes to maintain the Restart Continuation Bit (A00011)
Refer to the CV500/CV1000 Operation Manual: Ladder Diagrams for details.
Set the mode that the PC is to enter when power is turned ON or the PC is reset.
The current setting is shown in parentheses.
Specify whether or not User Memory contents (AUTOEXEC.OBJ) is to be trans-
ferred from the Memory Card when PC power is turned on. If you specify transfer
Section 7-2